Gas Safety (Installation and Use) Regulations
IMPORTANT: The appliance MUST be connected to the gas supply by use of a 15 mm x ½” female coupler, seal, copper pipe and an isolation tap fitted in an easily accessible position.
oIt is the law that all gas appliances are installed by competent persons in accordance with the current edition of the Gas Safety Installation and Use Regulations.
oIt is in your interest and that of safety to ensure compliance with the law.
oIn the UK, GASSAFE registered installers work to safe standards of practice. The cooker must also be installed in accordance with the current edition of BS 6172. Failure to install the hob correctly could invalidate the warranty, liability claims and lead to prosecution.
oPut the gas seal inside of the 15 mm x ½” female coupler .
oFully tighten the 15 mm x ½” female coupler and seal onto the gas rail.
oIMPORTANT: The female coupler must be positioned the right way up, as shown in the picture on the previous page.
oGas pressure may be checked on a
IMPORTANT: On completion carry out a gas soundness test.
24