Baumatic BGG64W manual Cleaning, Installation, Declaration of conformity

Page 7

Cleaning

oCleaning of the hob should be carried out on a regular basis.

o IMPORTANT: Before attempting to clean the appliance, it should be disconnected from the mains and cool.

oGreat care should be taken whilst using this appliance and when following the cleaning procedure.

oYou should not use a steam jet or any other high pressure cleaning equipment to clean the appliance.

Installation

This appliance must be correctly installed by a GASSAFE registered installer, strictly in accordance with the manufacturer’s instructions and the relevant British Standards. Please see the specific section of this booklet that refers to installation.

o Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance.

oIf the appliance is being used in a Leisure Accommodation Vehicle, the requirements of N 721 MUST be followed.

oBaumatic Ltd. DO NOT recommend that this appliance is installed on any type of marine vessel.

Declaration of conformity

This appliance complies with the following European Directives:

-2006/95/CE General regulations / Low tension -2009/142/CE Concerning gas appliances

-1935/2004/CE 90/128/EEC This appliance is suitable to come in contact with food

-2004/108/CE Electromagnetic compatibility

The manufacturer declares that the hob is built using certified materials and requires the appliance to be installed in accordance with the standards currently in force. This appliance must be used by a trained person for domestic purposes only.

7

Image 7 Contents
BGG30 / BGG32 / BGG60 / BGG64 / BGG70 / BGG74 Gas hobs BGG30 / BGG32 Cm Burner gas hob BGG60 / BGG64 Contents Environmental note General Information Important safety informationGeneral Safety Child SafetyDuring use Installation CleaningDeclaration of conformity  Flame failure safety device on each burner SpecificationsProduct specifications BGG60 BGG60 / BGG64 Product dimensions Aperture dimensionsProduct specifications BGG64 Product specifications BGG70 / BGG74 Product dimensions Aperture dimensionsMains Supply Lead Rated VoltageSupply Connection Max Rated InputsBGG60 Gas hob surface layoutBGG64 Before first use Using the gas hobSwitching the hob on Automatic ignition with flame failure safety deviceMinimum Maximum Diametre Energy saving tipsAfter each use CleaningCleaning the hob top Cleaning the hob burnersMaintaining the cast iron pan stands InstallationPositioning Unpacking the appliance Installing the applianceBGG30 / BGG32 BGG60 / BGG64 BGG70 / BGG74 All models Important information Gas connectionVentilation requirements Important On completion carry out a gas soundness test Gas Safety Installation and Use RegulationsButane Gas adjustment Conversion to LPGPropane Minimum flow adjustment for hob gas taps Gas tap maintenance Electrical connection Switch the appliance off at your mains supplyReplacing the mains supply cable Do not Attempt to Repair the Appliance Yourself My appliance isn’t working correctlyBaumatic Consumables United Kingdom
Related manuals
Manual 32 pages 55.37 Kb Manual 1 pages 38.23 Kb