BENDIX BW2920 manual Read These Instructions Prior to Installation

IMPORTANT

READ THESE INSTRUCTIONS PRIOR TO INSTALLATION

This SmartTire Trailer-Link™TPMS kit is pre-programmed and ready to use, subject to your application:

●The sensors have been PRE-ASSIGNED TO WHEEL POSITIONS and are identified on each unit with a position label (P1, P2, P3, etc.) – install the sensors as shown in Figure 1.

●Default values have been assigned to each axle for the following

(depending on kit configuration):

◊Cold Inflation Pressure (CIP) – preset to 100 PSI

◊First Alert Level (FAL) – preset to ±15% from expected (temperature compensated)

◊Second Alert Level (SAL) – preset to -20% from CIP

◊High temperature alert – 185°F (85°C)

Figure 2

13