3.4.2 Re-Mounting Tires Using Tire Irons
To avoid damaging the sensor, simply mount the tire ensuring that the last part of the bead to slip over the flange happens directly at the sensor. Start at one end of the tire and work towards the opposite end with the tire oriented so that the beads are first pushed under the rim flange directly opposite the sensor (1) and then worked over the flange toward the sensor (2). The bead will finally slip over the rim flange at the sensor without contacting it (3). Repeat for the remaining bead.
1 | 2 | 3 |
Figure 7
17