3.4.3Re-Mounting Commercial Tires Using a Vertical Tire Machine
1.Place the rim on the machine so that the rim flange clamp is at the
12 o’clock position, the sensor is at the 2 o’clock position and the mounting hook is at the 8 o’clock position.
Figure 8
Rim Flange Clamp
Sensor
2.Advance the wheel clockwise to pass both beads over the rim flange simultaneously. The tire should mount onto the wheel without contacting the sensor.
Mounting
Hook
Figure 9
3.4.4
1.Place the rim on the machine with the mounting shoe at the 9 o’clock position and the sensor at the 5 o’clock position.
Figure 10
Mounting |
Shoe |
Sensor |
18 |