Filling with rinse aid

The rinse aid is released during the final rinse and it helps to prevent water from forming droplets on your dishes. These droplets will lead to spots and streaks being left on items after the wash program has completed.

oYour dishwasher is designed to utilise liquid rinse aid.

oThe rinse aid dispenser is located inside the drop down door, next to the detergent dispenser.

o To access the rinse aid dispenser, you should turn the cap anticlockwise and it will pop out of the hole. Then slowly pour in liquid rinse aid, the rinse aid dispenser will hold approximately 140 ml of rinse aid.

oYou should continue to fill with rinse aid, until the level indicator turns completely black.

oBe careful not to overfill the dispenser, as this could cause oversudsing when a wash program is selected. Wipe away any rinse aid excess or spillages with a damp cloth.

oReplace the cap and turn it clockwise until it locks into position.

oYou should refill the rinse aid dispenser when the rinse aid indicator neon lights on the control panel.

oIMPORTANT: If you are using 3 in 1 dishwasher tablets then you should still fill the rinse aid dispenser.

Setting the rinse aid level

The amount of rinse aid that the dishwasher requires also depends on the hardness of your water. You should experiment with the rinse aid setting, until you find a level that gives the best results.

oOn the first wash cycle, we would recommend that the rinse aid level is set to number 2.

o If you get water spots and poor drying performance, then you should turn the arrow anticlockwise and increase the setting to the next number.