Baumatic BDW45.1 manual Filling with dishwasher detergent

Page 15

oYou should continue to adjust the rinse aid level upwards until you get no water spots.

oIf you get cloudiness or streaking on your dishes, the rinse aid level is set too high and it is causing foaming during the wash cycle. Turn the arrow clockwise and lower the setting to the next number.

Filling with dishwasher detergent

The detergent dispenser must be refilled at the start of each wash cycle (apart from the Rinse wash program).

oOpen the lid that closes over the detergent dispenser and place the detergent inside of the dispenser.

oThe section marked 1 in the diagram is for the main wash cycle detergent. Only one detergent tablet should be placed in the dispenser at any one time. If you are using detergent powder or liquid, you should follow the detergent manufacturer’s recommendations.

o The section marked 2 in the diagram can have separate detergent placed in it for any wash cycle that has a pre-wash element to it, however this is optional. This must be a liquid or powder detergent, not another detergent tablet.

oShut the detergent dispenser lid and position the clip on the outer edge, so that it holds the lid shut.

oAt the beginning of a wash cycle the clip will open and the tablet/powder/liquid will enter the dishwasher.

15

Image 15
Contents Page BDW45.1 Contents Environmental Note Installation General SafetyDaily use Declaration of conformity Child SafetyProduct specifications SpecificationsProduct dimensions Aperture dimensionsOptional extra Power consumptionEnergy efficiency details Electrical detailsDescription of the appliance Using your dishwasher Control panelBefore first use Filling with dishwasher salt Water Hardness Setting the water softener levelFilling with rinse aid Setting the rinse aid levelFilling with dishwasher detergent Loading the upper basket Adjusting the upper basketUpper position Lower positionLoading the lower basket Maximum height Dishes upper basket Dishes lower basketLoading dishes and cutlery Cutlery basketPage Glass Program tableSetting a wash program Setting a delay start Changing the wash programAt the end of a wash program Rinse aid and salt indicator neons Saving energy using your dishwasher Loading dishesUsage Filter system Cleaning and maintenanceCleaning the filters Cleaning the control panel Cleaning the spray armsCleaning the door Error code failure systemCall the Baumatic Customer Care Department Problem Possible What to do Causes General troubleshootingUtensils are not Aperture requirements InstallationPreparing and connecting the furniture door Installation stagesPage Adjusting the tension of the door spring Do not Connect the Water Inlet Hose to a HOT Water TAP Connecting to the mains water supplyConnecting to the power supply Connecting to the water outletApplying the condensation strip Information on IT is ImportantPositioning the dishwasher Levelling the appliance Securing the dishwasher Do not Attempt to Repair the Appliance Yourself My appliance isn’t working correctlyBaumatic Consumables Technical Data United Kingdom