Baumatic BDW45.1 manual General Safety, Installation

Page 5

IMPORTANT SAFETY INFORMATION

Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line.

General Safety

o Repairs to your appliance must only be carried out by a Baumatic engineer or one of its authorised service agents. Any attempt by an inexperienced person to repair the appliance, could result in injury or damage to your dishwasher.

oIf you notice that the mains cable is damaged. The appliance must not be used. The same applies if you notice that the worktop, control panel or base area is damaged. As this could allow access to the internal components of the machine.

oThe appliance should be turned off and isolated from the mains supply, before either cleaning or maintenance work is attempted.

oThe mains cable must not be used to pull the plug out of the electrical socket.

oThe machine should not be sprayed with water.

oThe external surface of the appliance may become hot whilst your dishwasher is in use.

oIt is possible for small animals to chew either mains cables or water hoses, which could cause an electric shock hazard.

Installation

oThe installation instructions contained within this user manual should be followed.

oIt is obligatory for the completed installation to comply with all relevant building regulations and local water authority requirements.

oBefore the first use of the appliance, you should follow the steps listed in the “Before first use” section on page 11 and page 42 of this manual.

5

Image 5
Contents Page BDW45.1 Contents Environmental Note Installation General SafetyDaily use Declaration of conformity Child SafetyProduct dimensions SpecificationsAperture dimensions Product specificationsEnergy efficiency details Power consumptionElectrical details Optional extraDescription of the appliance Before first use Using your dishwasherControl panel Filling with dishwasher salt Water Hardness Setting the water softener levelFilling with rinse aid Setting the rinse aid levelFilling with dishwasher detergent Loading the upper basket Adjusting the upper basketUpper position Lower positionLoading the lower basket Maximum height Dishes upper basket Dishes lower basketLoading dishes and cutlery Cutlery basketPage Glass Program tableSetting a wash program At the end of a wash program Setting a delay startChanging the wash program Rinse aid and salt indicator neons Usage Saving energy using your dishwasherLoading dishes Filter system Cleaning and maintenanceCleaning the filters Cleaning the control panel Cleaning the spray armsCleaning the door Error code failure systemCall the Baumatic Customer Care Department Problem Possible What to do Causes General troubleshootingUtensils are not Aperture requirements InstallationPreparing and connecting the furniture door Installation stagesPage Adjusting the tension of the door spring Do not Connect the Water Inlet Hose to a HOT Water TAP Connecting to the mains water supplyConnecting to the power supply Connecting to the water outletApplying the condensation strip Information on IT is ImportantPositioning the dishwasher Levelling the appliance Securing the dishwasher Do not Attempt to Repair the Appliance Yourself My appliance isn’t working correctlyBaumatic Consumables Technical Data United Kingdom