Alcatel 8410D manual Drop, Using the Softkeys to Activate a Feature

Page 16

Spres

Abbreviated Dialing Suppress

Stats

ACD Agent Statistics

Stop

Abbreviation Dialing Stop/ Indefinite Wait

Timer

Timer

TmDay (or DayTm)

Date and Time

View

Stored Number

*A <Call Display> button should be administered if access to System Directory is provided. It is also desirable for <Next Display> to be administered.

Using the Softkeys to Activate a Feature

Your display and softkeys allow you to access up to 12 switch-related features. For example, you may want to use the Call Forwarding All Calls feature to send all your calls to another extension while you are away from your phone. You can activate this feature with the softkeys in the following way:

To access a feature with the softkeys (Call Forwarding All Calls is used in this example)

1Press <Menu>.

•The display shows the initial feature option screen:

LWC CnLWC AutCB Timer

2Press <Next>.

•The display shows:

CFrwd CPark TmDay PCall

3To use the Call Forwarding All Calls feature, press the softkey below CFrwd and then dial the extension to which your calls should be forwarded.

Note: When the feature is activated, after the display screen shows you the digits you are dialing, an arrow appears above the feature. If there is not an arrow above the feature, the feature is off.

When you wish to cancel Call Forwarding All Calls, press the softkey under CFrwd again. The arrow above CFrwd (showing feature status indication) disappears. Your calls will no longer be forwarded

Drop

To disconnect from a normal call and obtain dial tone without hanging up the handset

1Press <Drop>.

[dial tone]

Note: If you press <Drop> during a conference call, the last party added will be dropped, and you will remain connected to the other parties.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Call appearances/feature buttons About Your TelephoneConference button Dial padDisplay Display control buttonsDrop button HandsetTest button Volume control buttonTransfer button Conventions Used in Procedure Descriptions Xxxxx Feature and FeatureConventions Special InstructionsFeature Finder Abbreviated Dialing ADHandset Volume Ringer Volume Time/Date Abbreviated Dialing To program or reprogram an AD buttonTo place an AD call Ringback toneTo retrieve a message when your Message light is on To cancel Automatic CallbackAudix Automatic CallbackCall Forwarding All Calls Burst ring to coworkerCall Pickup To cancel Call ForwardingConference Directory To drop the last party added to a conference callTo search the directory for a name To place a call to the name shownAbbreviation Feature Other Softkey Features That May Be On Your DisplayDisplay, Softkeys, and Control Buttons Using the Softkeys to Activate a Feature DropExit Handset VolumeHold Inspect Last Number Dialed RedialMute To answer a new call while active on anotherRinger Volume To adjust the ringer volume speaker is not activeNormal Display Select RingSend All Calls Self-TestTo test the lights and the display on your telephone To cancel Send All Calls SpeakerphoneTo change from the speakerphone to the handset To prevent the other party from hearing youStored Number Time/DateTimer TransferTo see the date and time To see elapsed time hours, minutes, secondsRinging Tones Tones and Their MeaningsFeedback Tones Problem TroubleshootingSolution
Top Page Image Contents