Alcatel 8410D manual Timer, Transfer, To see the date and time

Page 23

To see the date and time

1Press <Menu> and then press the softkey below TmDay or, if TmDay is not available on your display, press <Date/Time>.

• The display returns to Normal Mode after a few seconds.

Note: The telephone gets this information automatically, you will not need to set it.

Timer

You can access this feature with the softkeys only if the feature name, Timer, appears on the second line of one of the feature option screens.

To see elapsed time (hours, minutes, seconds)

1Press <Menu> and then press the softkey below Timer or, if Timer is not available on your display, press <Timer>.

•The elapsed time is shown.

2To stop the timer and clear the display, press <Menu> and then press the softkey below Timer again or, if Timer is not available on your display, press <Timer> again.

•The elapsed time is displayed on the screen for about four seconds and then disappears.

Transfer

To send the present call to another extension or outside number 1 Press <Transfer>.

[dial tone]

•The present call is put on hold and the green light next to the held call flutters.

•You are given a new call appearance.

2Dial the number to which the call is to be transferred.

[ringback tone]

3Remain on the line and announce the call; if there is no answer or the line is busy, return to the held call by pressing its <xxxxx>.

4Press <Transfer> again.

• The call is sent to dialed number.

5Hang up.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Dial pad Call appearances/feature buttonsAbout Your Telephone Conference buttonHandset DisplayDisplay control buttons Drop buttonTransfer button Volume control buttonTest button Special Instructions Conventions Used in Procedure DescriptionsXxxxx Feature and Feature ConventionsAbbreviated Dialing AD Feature FinderHandset Volume Ringer Volume Time/Date To program or reprogram an AD button Abbreviated DialingRingback tone To place an AD callAutomatic Callback To retrieve a message when your Message light is onTo cancel Automatic Callback AudixBurst ring to coworker Call Forwarding All CallsConference To cancel Call ForwardingCall Pickup To place a call to the name shown DirectoryTo drop the last party added to a conference call To search the directory for a nameDisplay, Softkeys, and Control Buttons Other Softkey Features That May Be On Your DisplayAbbreviation Feature Drop Using the Softkeys to Activate a FeatureHold Handset VolumeExit To answer a new call while active on another InspectLast Number Dialed Redial MuteSelect Ring Ringer VolumeTo adjust the ringer volume speaker is not active Normal DisplayTo test the lights and the display on your telephone Self-TestSend All Calls To prevent the other party from hearing you To cancel Send All CallsSpeakerphone To change from the speakerphone to the handsetTime/Date Stored NumberTo see elapsed time hours, minutes, seconds TimerTransfer To see the date and timeFeedback Tones Tones and Their MeaningsRinging Tones Solution TroubleshootingProblem
Top Page Image Contents