2.23.2 Installing Windows® 7 / 7
If you want to install Windows® 7 / 7
Using SATA / SATA2 / SATA3 HDDs with NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY 
Advanced screen 
Storage Configuration. B. Set the option “SATA Mode” to [AHCI]. (For SATA2_0 to SATA2_3, SATA3_0 and
SATA3_1 ports.)
Set the options “Marvell 9172 SATA3_M0_M1 Operation Mode”, “Marvell 9172 SATA3_M2_M3 Operation Mode” and “Marvell 9172 eSATA3_0_1 Operation Mode” to [AHCI].
STEP 2: Install Windows® 7 / 7
Using SATA / SATA2 / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY 
Advanced screen 
Storage Configuration. B. Set the option “SATA Mode” to [IDE]. (For SATA2_0 to SATA2_3, SATA3_0 and
SATA3_1 ports.)
Set the options “Marvell 9172 SATA3_M0_M1 Operation Mode”, “Marvell 9172 SATA3_M2_M3 Operation Mode” and “Marvell 9172 eSATA3_0_1 Operation Mode” to [IDE].
STEP 2: Install Windows® 7 / 7
2.24 Untied Overclocking Technology
This motherboard supports Untied Overclocking Technology, which means during overclocking, BCLK enjoys better margin due to fixed PCI / PCIE buses. Before you enable Untied Overclocking function, please enter “Overclock Mode” option of UEFI setup to set the selection from [Auto] to [Manual]. Therefore, BCLK is untied during overclocking, but PCI / PCIE buses are in the fixed mode so that BCLK can operate under a more stable overclocking environment.
Please refer to the warning on page 11 for the possible overclocking risk before you apply Untied Overclocking Technology.
58