DRAM Burst Length
DRAM Burst length can be set as [8] or [4].
Init. Graphic Adapter Priority
This allows you to select [PCI/AGP] and [AGP/PCI] as the initial graphics adapter priority. The default vaule is [PCI/AGP].
Graphics Aperture Size
It refers to a section of the PCI memory address range used for graphics memory. It is recommended to leave this field at the default value unless the installed AGP card’s specifications requires other sizes.
OnBoard LAN
This allows you to enable or disable the “OnBoard LAN” feature.
OnBoard AC’97 Audio
Select [Auto], [Enabled] or [Disabled] for the onboard AC’97 Audio feature.
3.3.3 ACPI Configuration
BIOS SETUP UTILITY
Advanced
ACPI Configuration
Suspend To RAM | [Disabled] |
Restore on AC / Power Loss | [Power Off] |
[Disabled] | |
PCI Devices Power On | [Disabled] |
PS / 2 Keyboard Power On | [Disabled] |
RTC Alarm Power On | [Disabled] |
Select
| Select Screen |
| Select Item |
+- | Change Option |
F1 | General Help |
F9 | Load Defaults |
F10 | Save and Exit |
ESC | Exit |
v02.54 (C) Copyright
Restore on AC/Power Loss
Use this item to set the power state after an unexpected AC/power loss. If [Power Off] is selected, the AC/power remains off when the power recovers. If [Power On] is selected, the AC/power resumes and the sys- tem starts to boot up when the power recovers.
Ring-In Power On
Use this item to enable or disable
PCI Devices Power On
Use this item to enable or disable PCI devices to turn on the system from the
PS/2 Keyboard Power On
Use this item to enable or disable PS/2 keyboard to turn on the system from the
2 8