MSI 848P NEO-V - Motherboard - ATX manual OnBoard LAN, AC’97 Audio, Set Super I/O, OnBoard FDC

Page 54

BIOS Setup

OnBoard LAN

This setting controls the onboard LAN controller. Setting options: [Disabled], [Enabled].

AC’97 Audio

This item is used to enable or disable the onboard AC’97 (Audio Codec’97) feature. Selecting [Auto] allows the mainboard to detect whether an audio device is used. If an audio device is detected, the onboard AC’97 controller will be enabled; if not, the controller is disabled. Disable the function if you want to use other controller cards to

connect an audio device. Settings: [Disabled] and [Auto].

Set Super I/O

Press <Enter> to enter the sub-menu and the following screen appears:

OnBoard FDC

Select [Enabled] if your system has a floppy disk controller (FDD) installed on the system board and you wish to use it.

Option

Description

[Auto]

BIOS will automatically determine whether to enable the

 

onboard Floppy controller or not.

[Enabled]

Enables the onboard Floppy controller.

 

 

[Disabled]

Disables the onboard Floppy controller.

 

 

Onboard Serial Port A

This item specifies the base I/O port addresses of the onboard Serial Port 1 (COM A). Selecting [Auto] allows AMIBIOS to automatically determine the cor- rect base I/O port address. Settings: [Auto], [3F8/COM1], [2F8/COM2], [3E8/ COM3], [2E8/COM4] and [Disabled].

Onboard Parallel Port

This field specifies the base I/O port address of the onboard parallel port. Selecting [Auto] allows AMIBIOS to automatically determine the correct base I/O port address. Settings: [Auto], [378], [278], [3BC] and [Disabled].

Parallel Port Mode

This item selects the operation mode for the onboard parallel port: [ECP], [Normal], [Bi-Dir] or [EPP].

3-21

Image 54
Contents 865PE Neo2-V / 848P Neo-V Series Voir LA Notice D’INSTALLATION Avant DE Raccorder AU Reseau FCC-B Radio Frequency Interference StatementRevision History Copyright NoticeTrademarks Revision Revision History DateSafety Instructions Technical SupportContents Clear Cmos Jumper JBAT1 Getting Started Main Memory Mainboard SpecificationsChipset SlotsAudio DimensionOn-Board Peripherals LAN OptionalMainboard Layout Chipset848P Neo-V MS-6788 v2.X ATX Mainboard Hardware Setup Quick Components Guide SYSFAN1 , p.2-14Memory Speed/CPU FSB Support Matrix Example of CPU Core Speed Derivation ProcedureCentral Processing Unit CPU ThenCPU Installation Procedures for Socket Installing the CPU Fan Fan power cable DDR Population Rules MemoryIntroduction to DDR Sdram DIMM1 DIMM2Installing DDR Modules Dual-channel DDR IntroductionATX 12V Power Connector JPW1 Power SupplyATX 20-Pin Power Connector ATX1 ATX1Back Panel Mouse ConnectorKeyboard Connector PS/2 Mouse 6-pin Female PS/2 Keyboard 6-pin FemaleSerial Port Connector COM a USB ConnectorsSPDIF-out Port Connector RJ-45 LAN Jack Audio Port ConnectorsLine Stereo Audio Connectors Line Out MICParallel Port Connector LPT1 Fan Power Connectors CPUFAN1/SYSFAN1 ConnectorsFloppy Disk Drive Connector FDD1 CD-In Connector CD1ATA100 Hard Disk Connectors IDE1 & IDE2 Front USB Connectors JUSB2 & JUSB3MSI Reminds You Serial ATA HDD Connectors SATA1, SATA2 SATA2SATA1 Bracket Spdif Connector JSP1 Optional JSP1Front Panel Connectors JFP1 & JFP2 JFP1 JFP2Front Panel Audio Connector JAUD1 JAUD1Bracket 2 Connector JDB1 Optional JDB1Bracket Jumpers Clear Cmos Jumper JBAT1JBAT1 PCI Peripheral Component Interconnect Slots SlotsAGP Accelerated Graphics Port Slot PCI Interrupt Request RoutingBios Setup Entering Setup Selecting the First Boot DeviceGetting Help Default SettingsControl Keys Main MenuMain Menu Load High Performance Defaults Set Supervisor PasswordSet User Password Load Bios Setup DefaultsStandard Cmos Features Floppy Drive a Advanced Bios Features Boot To OS/2 BootUp Num-LockPassword Check A.R.T. for Hard DisksApic Acpi SCI IRQ System Bios CacheableMPS Revision CPU L1 & L2 CacheConfigure Sdram Timing by SPD Advanced Chipset FeaturesDram Timing Setting CAS# LatencyRAS# Precharge RAS# to CAS# DelayPrecharge Delay Burst LengthPower Management Features Re-Call VGA Bios at S3 ResumingAcpi Standby State Suspend Time Out Minute Power Management/APMPower Button Function Set Monitor EventsMouse PowerOn Function Keyboard PowerOn FunctionSpecific Key for PowerOn Resume On RTC AlarmClear Nvram PNP/PCI ConfigurationsPCI Latency Timer PCI Clocks Init. Graphics Adapter PriorityIRQ 3/4/5/7/9/10/11/14/15 PCI IDE BusMasterSet IRQs to PCI or ISA Set DMAs to PnP or ISADMA Channel 0/1/3/5/6/7 Integrated Peripherals On-Chip IDE ConfigurationOn-Chip ATAs Operate Mode USB ControllerCombined Mode Option ATA ConfigurationATA Keep Enabled ATA Channel SelectionAC’97 Audio Parallel Port ModeOnBoard LAN Set Super I/OEPP Version Parallel Port IRQParallel Port DMA Channel PC Health Status Frequency/Voltage Control Dynamic OverClockingDram Frequency Performance ModeCPU Ratio Selection Spread SpectrumCPU Vcore Adjust Adjust CPU Bus Clock MhzAdjust AGP/PCI Clock Mhz DDR Power VoltageSet Supervisor/User Password Load High Performance/BIOS Setup Defaults