MSI AM-690E manual Super IO Configuration

MS-9826 Mainboard
[Type]	Press PgUp/<+> or PgDn/<-> to select
	[Manual], [None] or [Auto] type. Note that the
	specifications of your drive must match with
	the drive table. The hard disk will not work
	properly if you enter improper information for
	this category. If your hard disk drive type is
	not matched or listed, you can use [Manual] to
	define your own drive type manually.
[LBA/Large Mode]	Enabling LBA causes Logical Block Ad-
	dressing to be used in place of Cylinders,
	Heads and Sectors
[Block(Multi-Sector Transfer)]	Any selection except Disabled determines
	the number of sectors transferred per block
[PIO Mode]	Indicates the type of PIO (Programmed Input/
	Output)
[DMA Mode]	Indicates the type of Ultra DMA
[S.M.A.R.T.]	This allows you to activate the S.M.A.R.T.
	(Self-Monitoring Analysis & Reporting
	Technology) capability for the hard disks. S.
	M.A.R.T is a utility that monitors your disk sta
	tus to predict hard disk failure. This gives you
	an opportunity to move data from a hard disk
	that is going to fail to a safe place before the
	hard disk becomes offline.
[32 Bit Data Transfer]	Enables 32-bit communication between
	CPU and IDE device
Super IO Configuration

3-8