Computer Setup

Diagnostics menu

Select

To do this

 

 

 

System Diagnostics menu

■ F1

System Information–Displays the following information:

 

❐ Identification information for the computer and the batteries in the

 

 

system.

 

❐ Specification information for the processor, cache and memory size,

 

 

system ROM, video revision, and keyboard controller version.

 

■ F2

Start-up Test–Verifies the system components needed for starting

 

the computer.

 

■ F3

Run-In Test–Runs a comprehensive check on system memory.

 

■ F4

Hard Disk Test–Runs a comprehensive self-test on any hard drive in

the system.

System Configuration menu

✎Some of the listed System Configuration options may not be supported by your computer.

Select

To do this

 

 

Language

Change the Computer Setup language.

 

 

Boot Options

■ Set a Startup Menu delay (in seconds).

 

■ Enable/disable Custom Logo (disabled by default).

 

■ Enable/disable Display Diagnostic URL (enabled by default).

 

■ Enable/disable CD-ROM boot (enabled by default).

 

■ Enable/disable SD Card boot (enabled by default).

 

■ Enable/disable floppy boot (enabled by default).

 

■ Enable/disable PXE Internal NIC boot (enabled by default).

 

■ Set the Express Boot Popup delay in seconds.

 

■ Set the boot order.

(Continued)

Maintenance and Service Guide

5–5