Removal and replacement procedures

Remove the display assembly:

1.Open the computer as far as possible.

2.Disconnect the following cables from the system board and remove the cables from the clips built into the system board shielding:

Fingerprint reader board cable

Webcam cable

Microphone cable

3. Remove the wireless antenna cables from the opening in the system board and the clips built into the system board shielding.

4.

Remove the two Phillips PM2.0×4.0 screws that secure the display panel cable to the system board.

5.

Disconnect the display panel cable from the system board.

6.

Remove the Phillips PM2.0×4.0 screw

that secures the display converter cable to the system board.

7.

Disconnect the display converter cable

from the system board.

4–28

Maintenance and Service Guide