MSI FUZZY 945GME1, FUZZY 945GM1 Front Panel Connector JFP1, Front Panel Audio Connector JAUD1

Hardware Setup

Front Panel Connector: JFP1

The mainboard provides one front panel connector for you to connect to the front panel switches and LEDs. JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide.

									Pin Definition
Power			Power				PIN	SIGNAL	DESCRIPTION
LED			Switch				1	HD_LED_P	Hard disk LED pull-up
				+	-		2	FPPWR/SLP	MSG LED pull-up
2						10	3	HD_LED_N	Hard disk active LED
1						9	4	FPPWR/SLP	MSG LED pull-up
							5	RST_SW_N	Reset Switch low reference pull-down to GND
	+	-		-	+
HDD			Reset				6	PWR_SW_P	Power Switch high reference pull-up
LED			Switch				7	RST_SW_P	Reset Switch high reference pull-up
			JFP1				8	PWR_SW_N	Power Switch low reference pull-down to GND
							9	RSVD_DNU	Reserved. Do not use.

Front Panel Audio Connector: JAUD1

This connector allows you to connect the front panel audio and is compliant with Intel® Front Panel I/O Connectivity Design Guide.

				Pin Definition
		PIN	SIGNAL	DESCRIPTION
		1	N/C	N/C
		2	AUD_GND	Ground used by analog audio circuits
9	1	3	AUD_MIC	Microphonepower
		4	AUD_VCC	Filtered +5Vused by analog audio circuits
10	2
JAUD1		5	AUD_FPOUT_R	Right channel audio signal to front panel
		6	AUD_RET_R	Right channel audio signal return from front panel
		7	N/C	N/C
		8	KEY	No pin
		9	AUD_FPOUT_L	Left channel audio signal to front panel
		10	AUD_RET_L	Left channel audio signal return from front panel

Important

If you don’t want to connect to the front audio header, pins 5 & 6, 9 & 10 have to be jumpered in order to have signal output directed to the rear audio ports. Otherwise, the Line-Out connector on the back panel will not function.

95

10 6

2-13