BIOS Setup
IDE Channel 0/1/2/3 Master/Slave
Press <+> or
IDE HDD Auto-Detection
Press Enter to allow BIOS to
IDE Channel 0 Master
Press PgUp/<+> or
If you select Manual, related information is asked to be entered to the following items. Enter the information directly from the keyboard. This information should be provided in the documentation from your hard disk vendor or the system manufacturer.
Access Mode | The settings are CHS, LBA, Large, Auto. |
Capacity | The formatted size of the storage device. |
Cylinder | Number of cylinders. |
Head | Number of heads. |
Precomp | Write precompensation. |
Landing Zone | Cylinder location of the landing zone. |
Sector | Number of sectors. |