| BIOS Setup |
[Disabled] | Disable the SATA controller. |
[Auto] | PATA and SATA will be arranged by BIOS, and |
| you will be able to see the IDE Device status |
[Legacy Mode] | listed in Standard COMS Features. |
PATA and SATA will be combined. Max. of 2 IDE | |
[Native Mode] | drives in each channel are available. |
PATA and SATA will both be enabled. Max. of 6 | |
| IDE drives are supported. |
SATA PORT Speed Settings
This setting controls the speed of the SATA port.
Onboard Device
Press <Enter> and the following
USB Controller
This setting is used to enable/disable the onboard USB controller.
USB 2.0 Controller
This setting is used to enable/disable the onboard USB 2.0 controller.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB keyboard.
AC97 Audio
[Auto] allows the mainboard to detect whether an audio device is used. If an audio device is detected, the onboard AC97 (Audio Codec’97) controller will be enabled; if not, it is disabled. Disable the controller if you want to use other controller cards to connect an audio device.
Onboard LAN Device 1/2
This setting controls the onboard LAN 1/2 device.
Onboard Lan 1/2 Boot ROM
These items enable or disable the initialization of the onboard LAN Boot ROMs during bootup. Selecting [Disabled] will speed up the boot process.