MS-7265 Mainboard
SuperIO Device
Press <Enter> and the following
Onboard FDC Controller
Select [Enabled] if your system has a floppy disk controller (FDD) in- stalled on the system board and you wish to use it. If you install
Onboard Serial Port 1/2
These items specify the base I/O port addresses of the onboard Serial Port 1/ Serial Port 2. Selecting [Auto] allows AMIBIOS to automatically determine the correct base I/O port address. Settings: [3F8/IRQ4], [2F8/ IRQ3], [3E8/IRQ4], [2E8/IRQ3] and [Disabled].
Watch Dog Timer
You can enable the system