≥Refer to the operating instructions of the hub or router.
≥You can perform this setup anytime by selecting “Easy Network Setting” in the Setup menu. (> 40)
≥You can redo these settings individually using “Network Settings”. (> 40)
≥Do not use this unit to connect to any wireless network for which you do not have usage rights.
During automatic searches in a wireless network environment, wireless networks (SSID) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access.
≥After performing network settings on this unit, the settings (encryption level, etc.) of the wireless router might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of the wireless router.
≥Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party, or the leaking of data such as personal or secret information.
*1 SSID:
An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.
*2 The wireless router compatible with
| Reprogramming the |
| |
| remote control | started | |
If you have more than one Panasonic products | |||
| |||
and the remote control operates both products at | Getting | ||
once, you will need to change the remote control | |||
| |||
code to prevent this occurrence. (> 42, “Remote |
| ||
Control”) |
| ||
|
|
| |
| Firmware updates |
| |
Occasionally, Panasonic may release updated |
| ||
firmware for this unit that may add or improve the |
| ||
way a feature operates. These updates are |
| ||
available free of charge. |
| ||
This unit is capable of checking the firmware |
| ||
automatically when connected to the Internet via |
| ||
a broadband connection. |
| ||
When a new firmware version is available, the |
| ||
following message is displayed. |
| ||
New firmware is available.
Please update firmware in Setup.
To update the firmware
Press [HOME]
>select “Others” and press [OK]
>select “Setup” and press [OK]
>select “System” and press [OK]
>select “Firmware Update” and press [OK]
>select “Update Now” and press [OK]
DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.
The firmware has been updated.
Current Version: x.xx
OK
RETURN
≥If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a
(This site is in English only.)
To show the firmware version on this unit. (> 42, “Firmware Version Information”)
≥Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment.
≥If you do not want to check for the latest firmware version, set “Automatic Update Check” to “Off”. (> 42)
VQT4Q16 21