Speaker settings
|
|
| |
|
| ms | C | dB | R |
L | 0.0 | 0 |
Complete |
| dB |
Test |
| 0 |
| SW | |
| ms | dB |
dB | ||
0 | 0.0 | 0 |
LS |
| RS |
AVolume (Channel balance)
BDelay time for the Centre speaker
CDelay time for the Surround and Surround
back speakers*
* Surround back speakers: optional (> 12)
∫Adjusting speaker level
(Effective when playing
1Select “Test” and press [OK]. A test signal is output.
2While listening to the test signal
Press [3, 4] to adjust the volume of each
speaker ( 
dB0 
).
The volume can be adjusted between r6 dB to s6 dB.
≥Set each speaker level according to the volume of the Front (L) and Front (R) speaker volume respectively.
3Press [OK].
The test signal stops.
∫Delay time
For optimum listening with
If either distance 1 or 2 is less than 3, measure the distance and adjust the time to make up for the difference (see the table below).
C
: A
L | C | R |
1 | 3 | : B |
| SW |
|
| 2 |
|
LS | RS |
|
LS | RS |
|
1 2 3: Primary listening distance
AActual speaker position B Ideal speaker position
1Press [3, 4, 2, 1] to select the distance box ( 
ms0.0 
) and press [OK].
2Press [3, 4] to select the setting and press [OK].
Delay time for the Centre speaker
Subtract the distance 1 from 3
Distance (Approx.) | Setting |
34 cm | 1.0 ms |
68 cm | 2.0 ms |
102 cm | 3.0 ms |
136 cm | 4.0 ms |
170 cm | 5.0 ms |
Delay time for the Surround and Surround back speakers
Subtract the distance 2 from 3
Distance (Approx.) | Setting |
170 cm | 5.0 ms |
340 cm | 10.0 ms |
510 cm | 15.0 ms |
|
|
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].
Advanced operations
VQT4Q16 43