Panasonic SC-BTT560 SC-BTT500 SC-BTT460 SC-BTT400 manual Listening to the Radio, RDS broadcasting

Listening to the Radio

You can preset up to 30 channels.

Preparation

Make sure that the FM antenna is connected. (> 16)

Presetting stations automatically

1 Press [RADIO] to select “FM”.

2 Press and hold [STATUS] to select “LOWEST” or “CURRENT”.

LOWEST

To begin auto preset with the lowest frequency (FM87.50).

CURRENT

To begin auto preset with the current frequency.*

*To change the frequency, refer to “Manual tuning and presetting”.

3 Press and hold [OK].

Release the button when “AUTO” is displayed.

The tuner starts to preset all the stations it can receive into the channels in ascending order.

Listening to a preset channel

1 Press [RADIO] to select “FM”.

2 Press the number buttons to select the channel.

To select a 1-digit number e.g., 1: [1] B [OK].

To select a 2-digit number e.g., 12: [1] B [2].

Alternatively, press [W, X] or [3, 4].

∫Manual tuning and presetting

Select a radio broadcast.

1 Press [RADIO] to select “FM”.

2 Press [SEARCH6] or [SEARCH5] to

select the frequency.

≥To start automatic tuning, press and hold [SEARCH6], [SEARCH5] until the frequency starts scrolling. Tuning stops when a station is found.

To preset the channel

3While listening to the radio broadcast

Press [OK].

4While “P” is flashing on the display Press the number buttons to select the channel.

≥A station previously stored is overwritten when another station is stored in the same channel preset.

≥The radio settings will be shown on the unit's display. (Some settings are also indicated on the TV screen.)

∫RDS broadcasting

If the station you are listening to is transmitting RDS signals, programme service or programme type can be shown on the display.

While listening to the radio broadcast

Press [STATUS] to display the text data.

PS: Programme service

PTY: Programme type

OFF: Frequency display

TV & Radio

VQT4Q16 31