Panasonic SC-BTT560 SC-BTT500 SC-BTT460 SC-BTT400 manual Unit switches to standby mode

Page 47

The unit switches to standby mode.

¾This unit will automatically turn to standby mode after 30 minutes if it is inactive. (> 23)

¾When the time set for the sleep timer has passed, the main unit will be turned off. (> 9)

¾One of the unit’s safety devices is activated. Press [Í/I] on the main unit to turn the unit on.

The unit does not turn off.

1Press and hold [Í/I] on the main unit for 3 seconds. (If still unable to turn the unit off, disconnect the AC mains lead, wait 1 minute,

then reconnect the AC mains lead.)

2Reset the unit as follows:

While the unit is off, press and hold [VOL +], [< OPEN/CLOSE] and [Í/I] on the main unit at the same time for more than 5 seconds.

Picture

The images from this unit do not appear on the TV.

Picture is distorted. Jittering occurs.

¾An incorrect resolution is selected in “HDMI Video Format”. Reset the setting as follows:

1Turn the unit on.

2Press and hold [OK], the yellow button and the blue button on the remote control at the

same time for more than 5 seconds.

j“00 RET” is displayed on the unit’s display.

3 Repeatedly press [1] (right) on the remote control until “04 PRG” is displayed on the unit’s display.

4 Press and hold [OK] for at least 3 seconds. Set the item again. (> 38)

jWhen Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not output properly, select “Yes” in “Default Settings” and make proper settings. (> 42)

¾The unit and television are using different video systems.

1Turn the unit on.

2Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds.

j“00 RET” is displayed on the unit’s display.

3Repeatedly press [1] (right) on the remote control until “05 P/N” is displayed on the unit’s display.

4Press and hold [OK] for at least 3 seconds. The system switches from PAL to NTSC or vice versa.

¾The system used on the disc doesn’t match your television.

jPAL discs cannot be correctly viewed on an NTSC television.

¾When “3D BD-Video Playback” in the Setup menu is set to “Automatic”, images may not be output depending on the connection method. After removing the disc from this unit, select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen displayed when playing 3D discs. (> 39)

¾If irregular colouring occurs on your TV, turn the TV off for about 30 minutes.

If it persists, move the speakers further away from the TV.

Video is not output in high-definition.

¾Confirm that “HDMI Video Format” in the Setup menu is set properly. (> 38)

3D video is not output.

¾Change the settings as required by the connected TV format. (> 39, “3D Type”)

¾Are the settings on this unit and the TV correct? (> 26)

¾Depending on the connected TV, the video being played back might switch to 2D video due to changes in resolution etc. Check the 3D setting on the TV.

¾Check that proper HDMI video input is selected on the TV.

3D video is not output correctly as 2D.

¾Select “Set before play” in the Setup menu, and select “2D Playback” in the setup screen displayed when playing 3D discs. (> 39, “3D BD-Video Playback”)

¾Discs that have recorded titles with Side by side (2 screen structure) and that can be enjoyed in 3D are played back in accordance with the settings of the TV.

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

¾Confirm the “TV Aspect” is set properly. (> 41)

¾Adjust the aspect setting on the television.

Reference

VQT4Q16 47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Firmware updates Wireless LAN connection PrecautionsTo dispose or transfer this unit Restriction on use of unauthorized copied contentTable of contents Package contents and accessories Unit and media care AccessoriesPlayable media Device Disc markings Device types Contents formatBD-Video Discs that cannot be played by this unitRegion management information FinalizeControl reference guide Remote controlUsing the remote control 11 BTT560 BTT500 BTT460 BTT400 Standby/on switch Í/IMain unit Front BTT560 BTT50012 BTT560 BTT500 Digital transmitter dock for wireless systemMain unit Rear HDMI1 in CABLE/SAT terminalPositioning BTT560 BTT500 Wireless connections SH-FX71Enjoy surround speaker sound wirelessly Upgrade to 7.1-channel systemThread the speaker Cable through Base Preparing the speakersAssembling the speakers BTT560 BTT460 Front speakers Attach the stand to the baseSpeaker cable sticker Connector Connecting the speaker cablesSpeaker connection ConnectionsTV Audio Connecting to a TVWhat is ARC? FM antenna connectionSet Top Box, etc Optical digital audio cable not supplied When the connecting devices do not have an Hdmi terminalOther device connection Set Top Box, etcLAN cable connection Connecting to the networkWireless LAN connection BTT560 BTT500 ≥ BTT560 BTT500AC mains lead supplied To a household mains socket Connecting the AC mains leadWired connection SettingsEasy Setting Easy Network SettingFirmware updates Reprogramming Remote controlSelecting the type of audio Inserting or removing mediaEnjoying TV with unit’s speakers SD Card ServiceHome menu NetworkUsing facial recognition Multi User ModeSwitching the user Using coloured buttonsOperations during playback PlaybackEnjoying BD-Live Displaying menus and playback informationEnjoying 3D video and photos Slideshow Using the iPod/iPhoneIPod/iPhone Playback Connecting with a dedicated USB cableBTT560 BTT500 Connecting to the Dock IPod/iPhone ConnectionViera Link Hdavi Control Automatic input switching Power on linkPower Off Link Viera remote controlSelect the STB audio Connecting the optical digital audio cableEnjoying TV and STB with unit’s speakers Select the TV audioListening to the Radio Presetting stations automaticallyListening to a preset channel Manual tuning and presettingSelect the item and press OK To exit from Viera Connect ≥ Network connection ≥ Network settingTo enjoy video communication e.g. SkypeTM Press InternetUsing the Digital Media Controller Home Network featurePlaying back contents on the Dlna server Operation Menu Option menuPersonal Taste Picture SettingsSound Settings Picture Setup menu3D Settings Sound ¾ Hdmi Audio Output Audio DelayManual Settings Graphic Display Level ¾ BD-Video Secondary AudioNetwork LanguageSystem RatingsFirmware Update ¾ Power Off LinkUnit Settings Remote ControlDelay time Speaker settingsAdjusting speaker level Attaching to a wall Changing the sound settingsSpeaker installation option Surround Effects  To prevent tipping/falling of the speakersCannot eject disc Troubleshooting guideGeneral operation Video is not output in high-definition Unit switches to standby modeUnit does not turn off Images from this unit do not appear on the TV¾ BTT560 BTT500 Cannot switch audioCannot hear the desired audio type No surround soundRadio IPod/iPhone operationOn the unit’s display MessagesOn the television UPD/  stands for a number or F  stands for a numberGeneral SpecificationsAudio File formatSupported format for Dlna PhotoDisplay languages list Language code listSide of product Back of product Panasonic Corporation \For\the\United\Kingdom\and\Ireland\customers\
Top Page Image Contents