Panasonic SC-BTT560 SC-BTT500 SC-BTT460 SC-BTT400 manual Messages, On the television

Page 50

Messages

The following messages or service numbers may appear on the TV or unit’s display.

On the television

Cannot play.

¾You inserted an incompatible disc.

Cannot play on this unit.

¾You tried to play a non-compatible image.

¾Confirm “SD” on the unit’s display is not displayed and re-insert the card.

No disc inserted.

¾The disc may be upside down.

$This operation is not available.

¾Some operations are unsupported by the unit. (For example, reverse slow-motion, etc.)

IP address is not set.

¾The “IP Address” in “IP Address / DNS Settings” is “---. ---. ---. ---”. Set the “IP Address”, “Subnet Mask”, and “Gateway Address”. (Select the automatic address acquisition if necessary.)

The wireless access point currently has a low network security setting. It is recommended to change to a higher setting.

¾Set a stronger network security level referring to the wireless router operating instructions.

On the unit’s display

F99

¾The unit fails to operate properly. Press [Í/I] on the main unit for 3 seconds to switch the unit to standby, then switch back on.

NET

¾While connecting to a network.

No PLAY

¾There is a viewing restriction on a BD-Video or DVD-Video. (> 41)

No READ

¾The media is dirty or badly scratched. The unit cannot play.

PLEASE WAIT

¾The unit is carrying out internal process. This is not a malfunction. You cannot operate the unit while “PLEASE WAIT” is displayed.

REMOVE

¾The USB device is drawing too much power. Remove the USB device.

SET 

(“  ” stands for a number.)

¾The remote control and main unit are using different codes. Change the code on the remote control.

Press and hold [OK] and the indicated number button at the same time for more than 5 seconds.

U59

¾The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.

Select a position with good ventilation when installing the unit.

50 VQT4Q16

Image 50

Contents Firmware updates Precautions Wireless LAN connectionRestriction on use of unauthorized copied content To dispose or transfer this unitTable of contents Package contents and accessories Accessories Unit and media careDevice Disc markings Device types Contents format Playable mediaFinalize Discs that cannot be played by this unitRegion management information BD-VideoControl reference guide Remote controlUsing the remote control BTT560 BTT500 BTT460 BTT400 Standby/on switch Í/IMain unit Front 11 BTT560 BTT500HDMI1 in CABLE/SAT terminal Digital transmitter dock for wireless systemMain unit Rear 12 BTT560 BTT500Upgrade to 7.1-channel system BTT560 BTT500 Wireless connections SH-FX71Enjoy surround speaker sound wirelessly PositioningBTT560 BTT460 Front speakers Attach the stand to the base Preparing the speakersAssembling the speakers Thread the speaker Cable through BaseConnecting the speaker cables Speaker cable sticker ConnectorConnections Speaker connectionFM antenna connection Connecting to a TVWhat is ARC? TV AudioSet Top Box, etc When the connecting devices do not have an Hdmi terminalOther device connection Set Top Box, etc Optical digital audio cable not supplied≥ BTT560 BTT500 Connecting to the networkWireless LAN connection BTT560 BTT500 LAN cable connectionConnecting the AC mains lead AC mains lead supplied To a household mains socketEasy Network Setting SettingsEasy Setting Wired connectionReprogramming Remote control Firmware updatesSelecting the type of audio Inserting or removing mediaEnjoying TV with unit’s speakers Network ServiceHome menu SD CardUsing coloured buttons Multi User ModeSwitching the user Using facial recognitionPlayback Operations during playbackEnjoying BD-Live Displaying menus and playback informationEnjoying 3D video and photos Using the iPod/iPhone SlideshowIPod/iPhone Connection Connecting with a dedicated USB cableBTT560 BTT500 Connecting to the Dock IPod/iPhone PlaybackViera remote control Automatic input switching Power on linkPower Off Link Viera Link Hdavi ControlSelect the TV audio Connecting the optical digital audio cableEnjoying TV and STB with unit’s speakers Select the STB audioManual tuning and presetting Presetting stations automaticallyListening to a preset channel Listening to the RadioPress Internet ≥ Network connection ≥ Network settingTo enjoy video communication e.g. SkypeTM Select the item and press OK To exit from Viera ConnectUsing the Digital Media Controller Home Network featurePlaying back contents on the Dlna server Option menu Operation MenuPicture Settings Personal TasteSound Settings Picture Setup menu3D Settings Sound ¾ BD-Video Secondary Audio Audio DelayManual Settings Graphic Display Level ¾ Hdmi Audio OutputLanguage NetworkRatings SystemRemote Control ¾ Power Off LinkUnit Settings Firmware UpdateDelay time Speaker settingsAdjusting speaker level Surround Effects Changing the sound settingsSpeaker installation option Attaching to a wallTo prevent tipping/falling of the speakers  Cannot eject disc Troubleshooting guideGeneral operation Images from this unit do not appear on the TV Unit switches to standby modeUnit does not turn off Video is not output in high-definitionNo surround sound Cannot switch audioCannot hear the desired audio type ¾ BTT560 BTT500IPod/iPhone operation RadioOn the unit’s display MessagesOn the television or F  stands for a number UPD/  stands for a numberSpecifications GeneralPhoto File formatSupported format for Dlna AudioLanguage code list Display languages listSide of product Back of product \For\the\United\Kingdom\and\Ireland\customers\ Panasonic Corporation