Raypak Y-200 Controller Field Wiring, Power to the Controller, For Single-Stage ON/OFF Boilers

Page 7

Power to the Controller

Controller Field Wiring

•Observe (follow proper) polarity.

•Observe proper wire colors while making electrical connections.

•Provide an external surge suppressor capable of maintaining system integrity.

•Provide overload protection and a disconnect means for equipment serviceability as required by local and state code.

•Conduit cannot be used as the ground. (There must be a “WIRED” ground.)

•Very Important: A grounding electrode con- ductor shall be used to connect the equipment grounding conductors, the equipment enclosures, and where the system is grounded, the grounded service conductor to the grounding electrode.

For Single-Stage (ON/OFF) Boilers

All stage connections on the control board are con- nected at the {TH} (Thermostat) location on the boiler wiring diagram.

For Multiple-Stage Boilers

First stage connections on the control board are con- nected at the {TH} (Thermostat) location on the boiler wiring diagram. Second (or third, etc.) stage connec- tions on the control board are connected at the locations shown on the boiler wiring diagram.

Fig. 2: Wiring Diagram

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Series Is a registered trademark of Underwriters Laboratories Inc Contents Concept of Operation Please RegisterOptions Controller ConfigurationsElectrical Installation Mechanical InstallationCheck Your Power Source For Multiple-Stage Boilers Controller Field WiringPower to the Controller For Single-Stage ON/OFF BoilersWiring Diagram Slave Cable Installation from System Control Module Air Temperature Sensor InstallationHydronic Heating Applications Water Temperature Sensor InstallationCheck Power Power TestDomestic Hot Water Supply Applications Installation Verification Procedure Control Screens Screen Description Factory DefaultInlet / Outlet Manual OverrideCircuit Board Layout Circuit Board LayoutProgram Mode Normal ModeKeypad M M Control Screen Displays & ProgrammingInitial Screen Primary ParametersControl Band Proportional Only Control BandN T R O L F S E T F U OffsetF S E T F S ET T I N G Reset ParameterReset Ratio HolidayRadiation System to Outdoor TemperatureSystem Status Advanced Programming FeatureMessage Meaning T O F F Water TemperatureOutdoor Cut-Off Temperature Outdoor Cut-Off DeadbandO R S B S a a a System TemperaturesSystem Monitor System Pump no ScreenStage Turn-On Delay Auxiliary DelayBoiler/Stage on Delay Boiler Turn-On DelayProportional Integral Derivative PID Boiler/Stage Off DelayBoiler Turn-Off Delay Stage Turn-Off DelayA D Lead Change TimeFor Manual Only For Auto OnlyS S W O R D PasswordSetup To enter the passwordSystem Test Set PasswordWater Temperature Limits To change the default password AAA to a new passwordStage/Sensor Connections for Y-200 Master/Slave Systems Master UnitSlave Unit Factory DefaultsLonWorks Optional Modem Password User DefaultsAlarm Call Events Alarm Call TelephoneAlarm Call ID Alarm Call RetryT W O R K Master Unit with SlavesPID Interval A V E S N E C T E DV E X X X X X X X X X X XX X X A V E S C O N N E C T E DMaster/Slave Diagram Temperature F Resistance K Ohms Sensor Resistance at Various TemperaturesIllustrated Parts List Limited Warranty
Related manuals
Manual 7 pages 24.2 Kb

Y-200 specifications

The Raypak Y-200 is a sophisticated and robust swimming pool heater that is designed for efficiency, durability, and optimal performance. Ideal for both residential and commercial pools, the Y-200 is equipped with advanced technology to ensure a seamless heating experience, catering to pool owners who prioritize quality and reliability.

One of the main features of the Raypak Y-200 is its impressive heating capacity. With a powerful heater that can efficiently raise the temperature of water in larger pools, users can enjoy comfortable swimming conditions year-round. The heater is designed to be easy to install and maintain, allowing for hassle-free integration into existing pool systems.

The Y-200 utilizes innovative digital controls, which give users precise measurement and adjustment capabilities. This includes a user-friendly display that provides real-time feedback on temperature settings and operational status. The digital interface makes it simple to program the heater according to individual preferences, ensuring that water is always at the desired temperature.

In terms of energy efficiency, the Raypak Y-200 boasts advanced technology that reduces energy consumption while maximizing heat output. The heater is designed with a reliable and robust heat exchanger that utilizes copper fin technology, providing excellent thermal conductivity and corrosion resistance. This ensures longevity and reduces the need for frequent maintenance.

Additionally, the Y-200 incorporates environmentally friendly technologies, including low-NOx emissions, aligning with modern standards for sustainability. This feature not only minimizes the environmental impact but also assists in meeting local regulations concerning emissions.

Durability is a hallmark of the Raypak Y-200. Constructed with high-quality materials designed to withstand the rigors of outdoor conditions, it provides users with peace of mind knowing that their investment is protected. The heater is also equipped with a weather-resistant cabinet, ensuring reliable operation regardless of climate.

In conclusion, the Raypak Y-200 stands out in the market due to its powerful heating capacity, advanced digital controls, energy-efficient technologies, and durable construction. It is an excellent choice for pool owners seeking a dependable and efficient heating solution to enhance their swimming experience. With its combination of high performance and user-friendly features, the Y-200 represents a valuable addition to any pool setting.
Top Page Image Contents