Accessories and Tools Needed

Accessories

To simplify the installation Maytag has available the installation parts shown below. You may or may not need all of these accessories depending on your type of installation. Call Maytag Customer Service at 1-800-788-8899 for an authorized installer.

EXPANSION TANKS FOR THERMAL EXPANSION CONDITIONS AVAILABLE IN 2 GALLONS (7.6 LITERS), Part No. 66001013 AND 5 GALLONS (18.9 LITERS), Part No. 66001014 CAPACITY.

DRAIN PANS AVAILABLE IN 22” (559 mm) DIAMETER (PART NO. 66001011) FOR WATER HEATERS HAVING A DIAMETER 20” (508

mm)OR LESS, 24” (610mm) DIAMETER (PART NO. 66001105) FOR WATER HEATERS HAVING A DIAMETER 22” (559 mm) OR LESS AND 28” (711 mm) DIAMETER (PART NO. 66001012) FOR WATER HEATERS HAVING A DIAMETER 26” (660 mm) OR LESS.

Tools

You may or may not need all these tools, depending on your type of installation. These tools can be purchased at your local hardware store.

•Pipe Wrenches (2) 14” (356 mm)

•Screwdriver

•Tin Snips

•6’ (1.82 m) Tape or Folding Ruler

•Garden Hose

•Drill

•Pipe Dope or Teflon Tape

DRILL

SLOT-HEAD SCREWDRIVER

TIN SNIPS

PHILLIPS SCREWDRIVER

	ROLL OF TEFLON	PIPE DOPE
		(SQUEEZE TUBE)
	TAPE (USE ONLY ON
		USE FOR WATER AND GAS
	WATER HEATER
		CONNECTIONS
	CONNECTIONS)

GARDEN HOSE

6 FOOT TAPE

PIPE WRENCH

Additional Tools Needed

When Sweat Soldering

•Tubing Cutters or Hacksaw

•Propane Tank

•Soft Solder

•Solder Flux

•Emery Cloth

•Wire Brushes

	PROPANE
TUBING CUTTER	TORCH

	ROLL OF
HACKSAW	EMERY CLOTH

3/4” (19 mm) WIRE BRUSH
	ROLL OF LEAD-FREE	SOLDER
1/2” (13 mm) WIRE BRUSH	SOFT SOLDER	FLUX