Raypak RFSDV34RFPAU, RFSDV34RFNAU Part 6 Replacement Parts List, Part 7 Conversion Instructions

Page 21

Part 6 Replacement Parts List

Insert replacement parts list and parts drawing here.

Part 7 Conversion Instructions

1.Disconnect power to the unit and shut off the gas supply.

2.Remove the window frame assembly. (see the Window Frame Assembly section)

3.Carefully remove the logs. (ensure they are not hot)

4.Remove pilot assembly from bracket.

5.Remove the 2 screws holding the burner housing assembly in place.

6.Remove the burner housing assembly.

7.Remove the main and front orifice and replace with the orifice supplied in the conversion kit. Use the small orifice size for the front burner and the bigger orifice size for the main burner.

8.Remove the compression fitting which holds the aluminium tubing in the pilot assembly. This will reveal the pilot injector which must be replaced with the pilot injector provided in the conversion kit.

9.Honeywell Gas Valve -:The Honeywell valve fitted to this appliance is preset for Propane gas. It is convertible to natural gas by a colour coded “conversion screw”. To insert the conversion screw, refer to the instructions and diagrams in the Honeywell Installation Instructions supplied in the conversion kit packaged with the RFSDV34 unit.

10.Reassemble the fireplace in reverse order except for the window frame assembly. Leave the window frame assembly off until the unit has been checked for leaks and the gas supply has been purged.

11.After purging the gas line and checking for leaks with soapy water, replace the window frame assembly. Light the unit and check for frame impingement on logs, adjusting them if necessary. Check the manifold and supply pressures.

NOTE: If further assistance is required, refer to the Troubleshooting and Parts List in this manual.

Page 21 of 27

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Raypak Vermont RFSDV34 Freestanding GAS LOG Fire Contents Part 7 Conversion What to do if YOU Smell GAS? Part 1 For Your SafetyPart 2 Installation Instructions Locating Your Gas Fireplace Dimension RFSDV34 Fitting Line Installation Gas Inlet and Burner Pressures Natural GasPreparation Page Part 3 General Flue Installation Glass Cleaning Window Frame Assembly RemovalPart 4 Operating Instructions General Glass InformationMaintenance Log Set and Lava Rock Material InstallationFlame Appearance Flame and Temperature AdjustmentLighting Instructions What to do if you smell gasIf YOU Cannot Contact YOU GAS Supplier Call the Fire Brigade To Turn Off the Heater Shut Off Procedure Remote Control Operation Refer to Fig OFF ModeOn Mode Manual Auto Mode Delay Timer ModeFan Override During Auto Mode Change Between F and C Temperature UnitsTo Change Batteries Part 5 TroubleshootingPage Troubleshooting the Gas Control System On PathAuto Path Part 7 Conversion Instructions Part 6 Replacement Parts ListPart 8 Wiring Diagram RFSDV34 GAS LOG Fire Wiring DiagramPage Page Page Rheem Australia * will PartWarranty Conditions

RFSDV34RFPAU, RFSDV34RFNAU specifications

The Raypak RFSDV34RFNAU and RFSDV34RFPAU are advanced commercial and industrial heat pumps designed for energy-efficient heating, cooling, and pool heating applications. These models embody Raypak's commitment to quality, reliability, and innovative technology, making them ideal for a variety of settings, from residential pools to large-scale commercial facilities.

One of the standout features of the RFSDV34 series is its environmentally friendly refrigerant, which complies with all current regulations while maximizing efficiency. This ensures that operators can maintain their heat pumps with minimal environmental impact, contributing to sustainability efforts in HVAC solutions. The units utilize variable-speed technology, which optimizes performance by adjusting the compressor speed based on the current heating or cooling demands. This not only enhances energy efficiency but also results in quieter operation when compared to conventional fixed-speed systems.

The heat pumps are equipped with advanced digital controls, allowing for precise temperature management and monitoring. Users can easily set desired temperatures and have the peace of mind that the unit will automatically adjust to changes in conditions. The user-friendly interface offers diagnostic capabilities, enabling troubleshooting without the need for extensive manual consultation.

Durability is another hallmark of the RFSDV34 series. The units are constructed with robust materials designed to withstand corrosion and extreme weather conditions. This includes features like a heavy-duty cabinet, weather-resistant components, and high-grade insulation. Consequently, these heat pumps can offer years of reliable service with minimal maintenance.

Additionally, the RFSDV34 models are designed with flexibility in mind. They can be integrated seamlessly into existing systems or used as standalone units. Their compact design allows for easy installation, even in tight spaces, making them an adaptable choice for various applications.

The combination of high performance, energy efficiency, and user-friendly technology positions the Raypak RFSDV34RFNAU and RFSDV34RFPAU as leading choices in the heat pump market. By prioritizing sustainable practices and cutting-edge innovation, Raypak ensures that these heat pumps not only meet industry standards but also exceed customer expectations, providing a reliable solution for heating and cooling needs.
Top Page Image Contents