Raypak RFSDV34RFPAU, RFSDV34RFNAU manual Part 2 Installation Instructions

Page 5

Part 2: Installation Instructions

This gas fireplace must be installed by a qualified installer in accordance with AS5601 and all relevant local building codes.

For safe installation and operation please note the following:

1.This fireplace gives off high temperatures and should be located out of high traffic areas and away from furniture and draperies.

2.Children and adults should be alerted to the hazards of fireplace high surface temperatures and should stay away to avoid burns or ignition of clothing.

3.CAUTION: Due to high glass surface temperatures children should be carefully supervised when in the same room as the appliance.

4.Under no circumstances should this fireplace be modified or altered. Parts removed for servicing should be replaced prior to operating this fireplace again.

5.Installation and any repairs to this fireplace must be performed by a qualified installer, service agency or service person. A qualified service person should be contacted to inspect the fireplace annually.

6.Control compartments, burners and air passages in this fireplace should be kept clean and free of dust and lint. Make sure that the gas valve and pilot light are turned off before you attempt to clean this appliance.

7.The flueing system should be checked once a year and cleaned if required.

8.Keep the area surrounding this appliance clear of combustible materials, gasoline and other flammable vapour and liquids. This heater should not be used as a drying rack for clothing.

9.Under no circumstances should any solid fuels (wood, paper, coal or cardboard etc.) be used in this appliance.

10.The flow of combustion and ventilation air must not be obstructed in any way.

11.When this appliance is installed directly on carpeting, vinyl tile, linoleum or any combustible material other than wood, this fireplace must be installed on a metal or panel extending the full width and depth of the appliance.

12.This appliance requires adequate ventilation and combustion air to operate properly – refer to AS5601 ventilation and combustion air requirements.

13.This appliance must not be connected to a chimney flue serving a separate solid fuel burning fireplace.

14.When the fireplace is not in use it is recommended that the gas control valve be left in the OFF position.

Page 5 of 27

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Raypak Vermont RFSDV34 Freestanding GAS LOG Fire Contents Part 7 Conversion What to do if YOU Smell GAS? Part 1 For Your SafetyPart 2 Installation Instructions Locating Your Gas Fireplace Dimension RFSDV34 Preparation Fitting Line InstallationGas Inlet and Burner Pressures Natural Gas Page Part 3 General Flue Installation Glass Cleaning Window Frame Assembly RemovalPart 4 Operating Instructions General Glass InformationMaintenance Log Set and Lava Rock Material InstallationFlame Appearance Flame and Temperature AdjustmentLighting Instructions What to do if you smell gasIf YOU Cannot Contact YOU GAS Supplier Call the Fire Brigade To Turn Off the Heater On Mode Manual Shut Off ProcedureRemote Control Operation Refer to Fig OFF Mode Auto Mode Delay Timer ModeFan Override During Auto Mode Change Between F and C Temperature UnitsTo Change Batteries Part 5 TroubleshootingPage Auto Path Troubleshooting the Gas Control SystemOn Path Part 7 Conversion Instructions Part 6 Replacement Parts ListPart 8 Wiring Diagram RFSDV34 GAS LOG Fire Wiring DiagramPage Page Page Rheem Australia * will PartWarranty Conditions

RFSDV34RFPAU, RFSDV34RFNAU specifications

The Raypak RFSDV34RFNAU and RFSDV34RFPAU are advanced commercial and industrial heat pumps designed for energy-efficient heating, cooling, and pool heating applications. These models embody Raypak's commitment to quality, reliability, and innovative technology, making them ideal for a variety of settings, from residential pools to large-scale commercial facilities.

One of the standout features of the RFSDV34 series is its environmentally friendly refrigerant, which complies with all current regulations while maximizing efficiency. This ensures that operators can maintain their heat pumps with minimal environmental impact, contributing to sustainability efforts in HVAC solutions. The units utilize variable-speed technology, which optimizes performance by adjusting the compressor speed based on the current heating or cooling demands. This not only enhances energy efficiency but also results in quieter operation when compared to conventional fixed-speed systems.

The heat pumps are equipped with advanced digital controls, allowing for precise temperature management and monitoring. Users can easily set desired temperatures and have the peace of mind that the unit will automatically adjust to changes in conditions. The user-friendly interface offers diagnostic capabilities, enabling troubleshooting without the need for extensive manual consultation.

Durability is another hallmark of the RFSDV34 series. The units are constructed with robust materials designed to withstand corrosion and extreme weather conditions. This includes features like a heavy-duty cabinet, weather-resistant components, and high-grade insulation. Consequently, these heat pumps can offer years of reliable service with minimal maintenance.

Additionally, the RFSDV34 models are designed with flexibility in mind. They can be integrated seamlessly into existing systems or used as standalone units. Their compact design allows for easy installation, even in tight spaces, making them an adaptable choice for various applications.

The combination of high performance, energy efficiency, and user-friendly technology positions the Raypak RFSDV34RFNAU and RFSDV34RFPAU as leading choices in the heat pump market. By prioritizing sustainable practices and cutting-edge innovation, Raypak ensures that these heat pumps not only meet industry standards but also exceed customer expectations, providing a reliable solution for heating and cooling needs.
Top Page Image Contents