SAFETY PRECAUTIONS (continued)

Floor Stand Setup

1 Remove the Stand Base from the Monitor

Keep the screws. They will CAUTION be used for the Floor stand

installation.

Remove the 4 screws and raise straight up from tabletop stand.

2 Install the Monitor on the Floor Stand

Monitor

About the Installation

This product is heavy and should be carried by at least 2 people.

For Stand Assembly; please refer to the Installation Manual of the Floor Stand.

3

Attach the Monitor to the Floor Stand with the 4 screws used with the

 

tabletop stand.

 

 

 

 

Adjust Monitor position left or CAUTION right to match with screw holes.

If the screw holes do not align, the Monitor may be damaged.

WARNING

Please make sure screws

are tightened properly.

 

 

Screws from the

 

tabletop stand.

ENGLISH

CAUTION

LCD Monitors are for use with Hitachi AS-LSZ0081or AS-LSZ0082Floor stand for UT37" Use with other floor stands could cause instability and possible injury.

12

Page 13
Image 13
Hitachi UT37X902, UT47X902 Safety Precautions Floor Stand Setup, Install the Monitor on the Floor Stand, Tabletop stand