Part 5 Troubleshooting, To Change Batteries

To Change Batteries

1.Remove cover on backside of the remote control. Install 3 AAA as shown on the cover and then re-attach the cover.

2.Once OPERATION steps 1 to 3 are completed, the receiver/valve and remote control are ready. Press any button on the remote control to initiate the recognition process between the receiver/valve and the remote control.

3.You may now use the functions as described in the REMOTE CONTROL section.

Fig 8. Comfort control wiring diagram

Part 5 Troubleshooting

Refer to Fig 6

1.Locate the LED light on the gas valve.

2.LED will blink after every valid command received from the remote control; this is not an error.

3.Failure codes may occur anytime after the pilot burner is lit.

4.The sequence is: failure code followed by light not blinking for 30 seconds.

5.In the event of multiple failure codes, the next failure code follows previous failure code by approximately 3 seconds.

If an error code 3 is observed while performing the testing, complete the following:

1.Make sure all the spade connectors are pushed all the way onto the terminals. If error code 3 still shows, go onto the next step.

2.Switch the two front thermopile leads with the back two. Be sure the white lead is connected to the spade marked with the white dot. If error code 3 still shows, replace the thermopiles.

Page 18 of 27

RFSDV34RFPAU, RFSDV34RFNAU specifications

The Raypak RFSDV34RFNAU and RFSDV34RFPAU are advanced commercial and industrial heat pumps designed for energy-efficient heating, cooling, and pool heating applications. These models embody Raypak's commitment to quality, reliability, and innovative technology, making them ideal for a variety of settings, from residential pools to large-scale commercial facilities.

One of the standout features of the RFSDV34 series is its environmentally friendly refrigerant, which complies with all current regulations while maximizing efficiency. This ensures that operators can maintain their heat pumps with minimal environmental impact, contributing to sustainability efforts in HVAC solutions. The units utilize variable-speed technology, which optimizes performance by adjusting the compressor speed based on the current heating or cooling demands. This not only enhances energy efficiency but also results in quieter operation when compared to conventional fixed-speed systems.

The heat pumps are equipped with advanced digital controls, allowing for precise temperature management and monitoring. Users can easily set desired temperatures and have the peace of mind that the unit will automatically adjust to changes in conditions. The user-friendly interface offers diagnostic capabilities, enabling troubleshooting without the need for extensive manual consultation.

Durability is another hallmark of the RFSDV34 series. The units are constructed with robust materials designed to withstand corrosion and extreme weather conditions. This includes features like a heavy-duty cabinet, weather-resistant components, and high-grade insulation. Consequently, these heat pumps can offer years of reliable service with minimal maintenance.

Additionally, the RFSDV34 models are designed with flexibility in mind. They can be integrated seamlessly into existing systems or used as standalone units. Their compact design allows for easy installation, even in tight spaces, making them an adaptable choice for various applications.

The combination of high performance, energy efficiency, and user-friendly technology positions the Raypak RFSDV34RFNAU and RFSDV34RFPAU as leading choices in the heat pump market. By prioritizing sustainable practices and cutting-edge innovation, Raypak ensures that these heat pumps not only meet industry standards but also exceed customer expectations, providing a reliable solution for heating and cooling needs.