Electrical Safety, Maintenance, Emergencies

JIMMY SERIES HYDRAULIC REBAR BENDERS — RULES FOR SAFE OPERATION

ELECTRICAL SAFETY

■ALWAYS test the ON/OFF switch on the hydraulic power unit before operating. The purpose of this switch is to shut down the rebar bender.

■NEVER use a extension cord that is frayed or damaged where the insulation has been cut.

■NEVER carry the hydraulic power unit by its power cord or disconnect it by yanking the cord from the power outlet.

■ALWAYS make certain that the proper extension cord has been selected for the job. See Table 5.

■NEVER allow power cord to lay in water.

■NEVER stand in water while operating the rebar bender.

■When connecting the hydraulic power unit to a power receptacle, make sure the receptacle circuit is connected to either a GFCI receptacle or a receptacle protected by a 20 amp circuit breaker.

■When plugging the hydraulic power unit into a power receptacle, check the nameplate for the correct operating voltage. Operating the rebar bender at the wrong voltage will damage the electrical components. ALWAYS read the nameplate before applying power.

■This hydraulic power unit is equipped with a 3-prong male power plug.DO NOT use a 2-prong adapter when plugging into a wall outlet.This will defeat the purpose of the ground circuit. If the plug does not fit into the receptacle, contact a qualified electrician to install a 3-conductor wall receptacle (outlet).

■Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.There is an increased risk of electrical shock if your body is grounded.

■DO NOT expose the hydraulic power unit to rain or wet conditions. Water entering the power unit will increase the risk of electrical shock.

■When operating the hydraulic power unit outside, be sure to use the appropriate outdoor extension cord.This type of extension cord reduces the risk of electrical shock.

■ALWAYS remove the AC power cord from the power source before performing any service or maintenance on the rebar bender. This preventative safety measure reduces the possibility of accidental starting.

POWER UNITTRANSPORTING (Electric-Hydraulic Pump)

■When transporting of the power unit (pump) is required, ALWAYS carry unit by its handle.

■ALWAYS wrap power and remote cable cords neatly to avoid tripping and damage when transporting.

MAINTENANCE

■NEVER lubricate components or attempt service on a operational rebar bender.

■ALWAYS maintain rebar bender in correct operating condition.

■ALWAYS fix damage to the rebar bender immediately and always replace broken parts. Replace with only MQ recommended parts.

EMERGENCIES

■ALWAYS know the location of the nearest fire extinguisher and first aid kit.

■In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.

JIMMY SERIES HYDRAULIC REBAR BENDERS — OPERATION AND PARTS MANUAL — REV. #9 (01/04/08) — PAGE 8

JB7090, JB9180, JB5135, JB8090, JB7135 specifications

Multiquip is known for its robust line of construction equipment, and among its impressive offerings are the JB11090, JB9180, JPU1, JB8090, and JB5135 products. Each of these models showcases Multiquip's commitment to performance, durability, and innovative technology.

The JB11090 is engineered for versatility and power, featuring a powerful engine that provides reliable performance on the job site. This unit is particularly known for its excellent fuel efficiency, which makes it a cost-effective choice for contractors. Its compact design allows for easy maneuverability in tight spaces, enhancing productivity without compromising on power.

The JB9180 is a heavy-duty model designed for intensive tasks. It boasts advanced noise reduction technology, making it suitable for use in urban settings where noise regulations are stringent. This model prioritizes operator comfort with an ergonomic control system and an adjustable platform that helps minimize fatigue during long working hours.

Designed for high efficiency, the JPU1 model distinguishes itself with its innovative fuel management system. This technology optimizes fuel consumption and reduces emissions, promoting environmental sustainability. The JPU1 also features advanced safety mechanisms, including overload protection and automatic shut-off functionality, ensuring the safety of operators during operation.

Multiquip's JB8090 model offers exceptional reliability and is built for extreme conditions. With a robust chassis and reinforced parts, it withstands harsh environments while maintaining high performance. This model is equipped with features that enhance ease of maintenance, such as easy access to components and a user-friendly control panel.

Lastly, the JB5135 exemplifies versatility with its multifunctional capabilities. This model can easily adapt to various tasks, making it a favorite among contractors who face diverse project requirements. It is designed with cutting-edge technology that enhances control precision, allowing operators to achieve results with minimal effort.

In summary, the Multiquip JB11090, JB9180, JPU1, JB8090, and JB5135 are impressive machines that embody the brand's focus on efficiency, safety, and operator comfort. Each model is tailored to meet specific industry demands while incorporating innovative technologies that underscore Multiquip’s status as a leader in construction equipment. Whether you require power, versatility, or sustainability, these machines provide the performance needed to tackle any job effectively.