Connectingthe Power

JIMMY SERIES HYDRAULIC REBAR BENDERS — APPLYING POWER

1.The electric-hydraulic pump requires 115 VAC, 60 Hz power. Applying power to the pump that is not speci- fied will cause severe damage to the pump's electric motor. Always read the electrical data plate before applying power to the pump.

2.The power plug on the pump is a 3-prong grounded type plug. ALWAYS connect this plug to a 3-prong grounded receptacle. NEVER plug this device into a 2-prong type receptacle.This will defeat the ground circuit.The use of a 3-prong to 2-prong adapter is strictly prohibited.

3.Connect the pump's AC power cord to a 115 VAC wall receptacle or portable generator (Figure 7) that is pro- tected by a 20 amp circuit breaker. For best results connect the power cord to a GFCI receptacle.

Since distance can affect voltage drop when using an extension cord,

NOTE ALWAYS make certain that the proper extension cord has been se- lected for the job. See Table 4.

4.Connectthehand-heldremotecontrolcabletothe power input receptacle on the power unit

5.To apply power to the electric-hydraulic pump, place the ON/OFF toggle switch (Figure 7) to the ON position (up).

Figure 7. Connecting The Power

DANGER - ELECTROCUTION HAZARDS

During operation of this rebar bender, there exists the possibility of electrocution, electrical shock or burn, which can cause severe bodily harm or even DEATH!

To avoid these hazards:

NEVER use damaged or worn cables when plugging the rebar bender into an AC power receptacle.

Table 4. Cable Selection (60 Hz, Single Phase Operation)

	Load In		Maximum Allowable Cable Length
Current in	Watts		Maximum Allowable Cable Length
	Watts

Amperes	At 120	#10 Wire	#12 Wire		#14 Wire	#16 Wire
	At 120
	Volts
	Volts

2.5	300	1000 ft.	600	ft.	375 ft.	250 ft.

5	600	500 ft.	300	ft.	200 ft.	125 ft.

7.5	900	350 ft.	200	ft.	125 ft.	100 ft.

NEVER grab or touch a live power cord with wet hands.

NEVER stand in water and touch a live power cord.

WET

HANDS

POWER

CORD

(POWER ON)

10	1200	250 ft.		150	ft.	100 ft.

15	1800	150	ft.	100	ft.	65	ft.

20	2400	125	ft.	75 ft.		50	ft.

CAUTION: Equipment damage can result from low voltage.

JIMMY SERIES HYDRAULIC REBAR BENDERS — OPERATION AND PARTS MANUAL — REV. #9 (01/04/08) — PAGE 15

JB7090, JB9180, JB5135, JB8090, JB7135 specifications

Multiquip is known for its robust line of construction equipment, and among its impressive offerings are the JB11090, JB9180, JPU1, JB8090, and JB5135 products. Each of these models showcases Multiquip's commitment to performance, durability, and innovative technology.

The JB11090 is engineered for versatility and power, featuring a powerful engine that provides reliable performance on the job site. This unit is particularly known for its excellent fuel efficiency, which makes it a cost-effective choice for contractors. Its compact design allows for easy maneuverability in tight spaces, enhancing productivity without compromising on power.

The JB9180 is a heavy-duty model designed for intensive tasks. It boasts advanced noise reduction technology, making it suitable for use in urban settings where noise regulations are stringent. This model prioritizes operator comfort with an ergonomic control system and an adjustable platform that helps minimize fatigue during long working hours.

Designed for high efficiency, the JPU1 model distinguishes itself with its innovative fuel management system. This technology optimizes fuel consumption and reduces emissions, promoting environmental sustainability. The JPU1 also features advanced safety mechanisms, including overload protection and automatic shut-off functionality, ensuring the safety of operators during operation.

Multiquip's JB8090 model offers exceptional reliability and is built for extreme conditions. With a robust chassis and reinforced parts, it withstands harsh environments while maintaining high performance. This model is equipped with features that enhance ease of maintenance, such as easy access to components and a user-friendly control panel.

Lastly, the JB5135 exemplifies versatility with its multifunctional capabilities. This model can easily adapt to various tasks, making it a favorite among contractors who face diverse project requirements. It is designed with cutting-edge technology that enhances control precision, allowing operators to achieve results with minimal effort.

In summary, the Multiquip JB11090, JB9180, JPU1, JB8090, and JB5135 are impressive machines that embody the brand's focus on efficiency, safety, and operator comfort. Each model is tailored to meet specific industry demands while incorporating innovative technologies that underscore Multiquip’s status as a leader in construction equipment. Whether you require power, versatility, or sustainability, these machines provide the performance needed to tackle any job effectively.

JIMMY SERIES HYDRAULIC REBAR BENDERS — APPLYING POWER