Rebar Adjustment Bolt

JIMMY SERIES HYDRAULIC REBAR BENDERS — OPERATION/SHUT-DOWN

For Model JB5090, JB7090, JB8090

The rebar bender may require adjustment in order to obtain a 90° bend. Adjustment is necessary due to inconsistencies in the rebar produced by steel mills and because each bender is capable of handling multiple diameters of rebar.

Shutting Down the Rebar Bender and Power Unit

1.Remove Rebar Bender from the rebar.

2.Place ON/OFF toggle switch in the OFF position.

3.Unplug AC Power cord from receptacle.

4.Disconnect hydraulic hose from Power Unit.

1.Use a 19 MM socket to loosen the bolt and a 24 MM socket to loosen the locknut (Figure 17) until the adjust- able block can be slid easily in the crescent groove on the side of the rebar.Note:there is no need to remove the hardware.

2.Insert a piece of the rebar to be used into the machine to assist in positioning the adjustable stop.

3.Slide the adjustable stop towards the rebar (away from the hydraulic ram) until it makes contact with the rod.

4.Back the adjustable stop off the rebar slightly so the rod can pass easily through the machine without binding.

5.Tighten the hardware securely , connect the bender to the pump and make a test bend.You should now be able to attain the desired bending angle. If the desired bend is not attained, repeat the process until the desired result is achieved.

5.Place protective hose cap on the male coupler end of the hose.

6.Roll up hydraulic hose. Store Rebar Bender in a safe place.

7.On the Power Unit, wrap the power and remote cords neatly. Store Power Unit in safe place.

Figure 17. Rebar Adjustment Bolt

JIMMY SERIES HYDRAULIC REBAR BENDERS — OPERATION AND PARTS MANUAL — REV. #9 (01/04/08) — PAGE 19

JB7090, JB9180, JB5135, JB8090, JB7135 specifications

Multiquip is known for its robust line of construction equipment, and among its impressive offerings are the JB11090, JB9180, JPU1, JB8090, and JB5135 products. Each of these models showcases Multiquip's commitment to performance, durability, and innovative technology.

The JB11090 is engineered for versatility and power, featuring a powerful engine that provides reliable performance on the job site. This unit is particularly known for its excellent fuel efficiency, which makes it a cost-effective choice for contractors. Its compact design allows for easy maneuverability in tight spaces, enhancing productivity without compromising on power.

The JB9180 is a heavy-duty model designed for intensive tasks. It boasts advanced noise reduction technology, making it suitable for use in urban settings where noise regulations are stringent. This model prioritizes operator comfort with an ergonomic control system and an adjustable platform that helps minimize fatigue during long working hours.

Designed for high efficiency, the JPU1 model distinguishes itself with its innovative fuel management system. This technology optimizes fuel consumption and reduces emissions, promoting environmental sustainability. The JPU1 also features advanced safety mechanisms, including overload protection and automatic shut-off functionality, ensuring the safety of operators during operation.

Multiquip's JB8090 model offers exceptional reliability and is built for extreme conditions. With a robust chassis and reinforced parts, it withstands harsh environments while maintaining high performance. This model is equipped with features that enhance ease of maintenance, such as easy access to components and a user-friendly control panel.

Lastly, the JB5135 exemplifies versatility with its multifunctional capabilities. This model can easily adapt to various tasks, making it a favorite among contractors who face diverse project requirements. It is designed with cutting-edge technology that enhances control precision, allowing operators to achieve results with minimal effort.

In summary, the Multiquip JB11090, JB9180, JPU1, JB8090, and JB5135 are impressive machines that embody the brand's focus on efficiency, safety, and operator comfort. Each model is tailored to meet specific industry demands while incorporating innovative technologies that underscore Multiquip’s status as a leader in construction equipment. Whether you require power, versatility, or sustainability, these machines provide the performance needed to tackle any job effectively.