USER’S GUIDE
OUTPUT TRAY AND PAPER SUPPORT WIRE
The printer ejects paper with printed surfaces face down into the output tray at the front of the printer.
When the output tray is closed, the ejected paper comes out sheet by sheet through the slit at the front. When you open the tray, sheets can be stacked on the tray.
Follow these steps to open the output tray:
1.Pull the top of the tray down ( ➀ ).
2.Extend the extension support wire ( ➁ ).
Fig. 2-8 Opening the Output Tray and
Extending the Extension Support Wire
You can stack up to 100 sheets in the output tray.
!Caution
∙When you use transparencies, remove each sheet immediately after printing. Stacking sheets may cause paper curled or paper jam.
∙Continuous printing with the output tray closed may cause condensation inside the output tray.
CHAPTER 2
