CHAPTER 4 OPTIONS
✒Note
The printer has only one slot for a SIMM upgrade. If you want to increase your printer memory again after you have installed a SIMM module into the slot, you will need to remove the previously installed SIMM first. For example if you have previously increased your memory form the standard 1MB to 3MB by adding a 2MB SIMM and you wish to increase your total memory to 5 MB, you need to remove the installed 2MB SIMM and install the new 4MB SIMM into the printer.
Installing the SIMM
To install the SIMM, follow these steps:
1.Turn off the power switch and unplug the power cord from the AC outlet. Disconnect the interface cable (printer cable) from the printer.
Fig. 4-3 Unplug the Power Cord
and Disconnect the Interface Cable
!Caution
Be sure to turn off the power switch and unplug the power cord to the printer before installing or removing the SIMM to/from the main controller board.
CHAPTER 4
