■Common (Continued)
Problem
Only sound, no display.
Noise.
Buttons unusable
(each source operation).
Audio sound is output but the display shows demonstration message.
E
N
G
L
I
S
H
Possible cause / Possible solution
34
The display is set to the Display OFF.
aPress [DISP] to change the display. (a Page 7)
A mobile phone is used near the unit.
aKeep the mobile phone away from the unit.
Menu is displayed.
aPress [MENU] / [SEL] or [DISP] to return to the regular mode.
Demonstration mode is ON.
aPress [DISP] to cancel the demonstration mode.
■Radio
Problem
Poor reception of FM stereo and monaural broadcasts.
Preset station is reset.
Possible cause / Possible solution
Station is too far, or signals are too weak.
aSelect other stations of higher signal level.
The radio antenna is not extended enough.
aExtend the radio antenna enough.
The motor antenna relay control lead is not connected correctly.
aIf there is a motor antenna in the car, connect the motor antenna relay control lead to the motor antenna lead that is installed in the car correctly.
Battery cable is not correctly connected.
aConnect the battery cable to the terminal that is always live.