Station Preset, Manual Preset, Memory

Station Preset

Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.

	Select a band and frequency. (step w and e on the previous page)
	q Press and hold [}] or [{] for more than 2 seconds until the preset
	number blinks.
	w Press [}] or [{] to select a preset number.
Manual Preset	e Press and hold [}] or [{] for more than 2 seconds to memorize.
Manual Preset	The display blinks once, and a receiving
Memory	station is saved in the memory.
Manually save a station in	Notes:
the preset memory.	¡Frequency setting can be performed even after selecting a preset number.
	¡To suspend preset write, press [DISP].

	Entering numbers directly from the remote control
	Select a band and frequency (step w and e on the previous page)
	Press and hold one of the preset button from [1] to [6] on the remote control
	for more than 2 seconds.

Select a band. (step w on the previous page)

Searching

Automatically save stations with good reception in the preset memory.

	Press and hold [BAND] for more than	Scanning
	2 seconds.	Scanning
	2 seconds.

¡The 6 stations with good reception will be automatically saved in the memory under preset numbers 1 to 6.

¡Once set, the preset stations are sequentially scanned for 5 seconds each. ¡To stop the scanning, press [}] or [{].

(Pressing one of the preset button from [1] to [6] on the remote control also can stop the scanning.)

Note: Only RDS stations will be saved at default setting (AF ON). To select non RDS stations too, set AF OFF. (a Page 11)

Note: New stations are overwritten on existing saved stations after following this procedure.

	Select a band. (step w on the previous page)
Preset Station	Press [}] or [{] to select the preset number for tuning in the preset station.

Calling
	Entering numbers directly from the remote control
	Press one of the preset button from [1] to [6] on the remote control.

CQ-DFX602N9