Sharp UP-3300 instruction manual Drink dispenser preset, 214, Value Number Use the numeric entry

■Drink dispenser preset

Procedure

Program each item as follows:

•VALUE NUMBER (Use the numeric entry)

•You can set the link of sort number of drink dispenser and PLU code.

AAA:Value in the hundred thousand’s and ten thousand’s and thousand’s place of a PLU code (0 through 999)

•The conversion of a sort number to a PLU code is made as follows:

Sort number = xxx (max. 3 digits) PLU code = AAAxxx (max. 6 digits)

NOTE

You cannot change the setting by this option while the received data on drink dispenser sales is stored in the buffer. In this case, a lock error will occur and the message “ENTRY ERROR” will be displayed.

• SEPARATE CODE (Use the numeric entry)

Enter a GLU/PBLU or drive-through separate code (1 through 999999).

For example, if you program “10” for the separate code, GLU/drive-through codes “1” through “10” are used for drive- through codes, and “11” through “999999” are used for GLU codes.

•CONNECTION (Use the selective entry) OFF-LINE: Makes drink dispenser off-line.ON-LINE: Makes drink dispenser on-line.

If “OFF-LINE” is selected, data reception from the drink dispenser is disabled. If “ON-LINE” is selected, the manual entry of PLU assigned to the drink dispenser sales article results in error correction of drink dispenser misoperation.

•PRINT FORMAT (Use the selective entry)

NOT PRINT: Does not print a drink dispenser misoperation item when reading a drink dispenser misoperation file (in the clerk report).

PRINT: Prints a drink dispenser misoperation item when reading a drink dispenser misoperation file (in the clerk report).

214