Overlapped Clerk Entry
This function allows to switch from one clerk to another clerk and to interrupt the first clerk’s entry. So the second clerk can do his or her entry in this mode. Interrupt handling is possible only in the overlapped clerk entry. For actual use of this function, contact your authorized SHARP dealer.
NOTE
•The overlapped clerk entry is not effective while the tendering sale is going on.
•If any clerk is still making an entry (or has not finalized the transaction yet), the POS terminal does not run in any mode other than REG and MGR, and no X/Z reports can be printed. The message “CLERK REMAINED” is displayed at this time.
Example
The entry by clerk1 is started.
Clerk change (1 to 2), interrupt initiated
The transaction by clerk2 is finished.
Clerk change (2 to 1), entry restarted, transaction finished
Key Operation |
| Display |
Clerk 1 is assigned. (Clerk key 1 is inserted.)
Clerk 2 is assigned. (Clerk key 2 is inserted.)
Clerk 1 is assigned. (Clerk key 1 is inserted.)
000001
000003
000003
3X/QTY
000002
CASH/TL
000001
000003
CASH/TL
93
