■Direct PLU/dept. key
You can assign PLUs and departments directly to the keyboard. In the case of PLUs, you may assign up to
Procedure | In the case of setting “000001 DIRECT PLU” |
Take STEP 1 thru STEP 3 shown above to open the window for programming each direct key.
▼
Touch a pertinent key.
▼
▼
• TYPE (Use the selective entry)
PLU: | Assigns the key as a direct PLU key. |
DEPT: | Assigns the key as a direct department key. |
NOTE
•When selecting a department, the screen on which a department code is to be entered (the message “DEPT. CODE”) will appear.
•When selecting a PLU, the screen on which a PLU code is to be entered (“PLU CODE”) will appear.
•LEVEL1 thru 10 (Use the numeric entry)
Enter a PLU code for each level. For example, if you want to use this key as PLU code1 (level 1) and PLU code101 (level 2), enter 1 for the “LEVEL1” and 101 for the “LEVEL2.”
NOTE
•You cannot assign a PLU or a department to the position to which a function key has been assigned.
