Sharp UP-3300 instruction manual Slip printer, 206, Rcpt Length Use the numeric entry

■Receipt printer (continued)

•AUTO CUTTER (Use the selective entry) Auto cutter function

YES: Enables auto cutter function.

NO: Disables auto cutter function.

NOTE When “ER-03RP” is connected, select “NO.”

•PAPER SHEET (Use the selective entry) Select a paper type.

TWO OR MORE: Uses two or more sheets.

ONE SHEET: Uses one sheet.

NOTE This option is available when the “TM-300” is selected.

•HEAD LOGO PRINT (Use the selective entry) Select a header logo print timing.

EACH ISSUE: The logo will be printed before printing transaction on each receipt.

PRE-PRINT: The logo will be printed beforehand printing transaction for a next receipt.

•RCPT LENGTH (Use the numeric entry)

Minimum length of the bill to be printed paper on the receipt paper

•PRINT TYPE (Use the selective entry) Select the type of receipt print formats.

ADDITION	SINGLE/DOUBLE
S/D + ADDITION	ADDITION+SINGLE
ADD WITHOUT TL	DOUBLE ADDITION
DOUBLE ADD+SNGL

■Slip printer

Procedure

Program each item as follows:

• TERMINAL# (Use the numeric entry)

Terminal number (1 through 254 : Enter “0” for local device.)

•CHANNEL# (Use the numeric entry) Channel number (1 through 7)

When you program as “0”, no RS-232 channel is assigned.

•PRINTER NAME (Use the selective entry)

Select the printer to be used.

SHARP ER-FBP40

EPSON TM-295

EPSON TM-U950

EPSON TM-T85

206