
14Drink Dispenser
Your POS terminal can be connected with a drink dispenser. The summary of drink dispenser operations is shown below.
Drink dispenser
The data such as GLU codes, clerk codes, sort numbers and so on which are entered at a drink dispenser is sent to the POS terminal.
Received data is overwritten to an applicable GLU code.
When an entry error is found, perform the following steps:
1.Check the error by the drink dispenser misoperation file reading or drink dispenser error reading.
Drink dispenser misoperation file reading REG or MGR mode
Clerk report |
|
|
|
| OP X/Z or X1/Z1 mode | |
|
|
| ||||
If there is misoperation data when you take an individual or full clerk X/Z report, the machine | ||||||
waits for selection of one of the following three commands (RETRY, ABORT and IGNORE) | ||||||
through the keyboard. |
|
| ||||
1 | RETRY: | attempts to retry the report issuing job. | ||||
2 | ABORT: | cancels the report issuing job. | ||||
3 | IGNORE: | issues the report, disregarding that there is misoperation data. In the case of | ||||
|
|
| the Z report, misoperation data is also reset. | |||
Drink dispenser error reading |
|
| X1/Z1 mode | |||
|
|
2.Correct the error with the drink dispenser correction in the REG or MGR mode.
The error which relates to GLU codes can be corrected. However, the error which relates to PLU codes or clerk codes cannot be corrected with the drink dispenser correction.
Procedure to return from Off-line to On-line mode
Case 1:
The drink dispenser was set to
The
Case 2:
The drink dispenser was set to