Sharp UP-3300 instruction manual Entering the Manager Mode, Override Entries

9Manager Mode

MGR MODE

The manager mode is used when managerial decisions must be made concerning POS terminal entries, for example, for overriding limitations and for other various non-programming managerial tasks.

NOTE

Normal POS terminal operations may also be performed in this mode.

Entering the Manager Mode

To enter the manager mode, select the REG mode from the mode selection menu, then use the following procedure:

Procedure

The display shown	When “0” is programmed for the
at right will appear.	secret code

XX	MGR	XXXX	ENTER
Manager code		Secret code

The manager code is stored in the manager file in advance. If the code entered is not found in this file, an error occurs. If the code is correct, it is printed on the journal and the POS terminal enters the manager mode.

Display

Override Entries

Programmed limits (such as maximum amounts) for functions can be overriden by placing the POS terminal in the manager mode.

Example

This example presumes that the POS terminal has been programmed not to allow coupon entries over 2.00.

Key Operation		Display
		000002
REG-mode entries	250	(–)2 ...... Error
		CLEAR
To enter the	1	MGR
manager mode	1245	ENTER

250(–)2

Return to the

REG mode.

CASH/TL

99