Sharp UP-3300 Slip printer continued Report printer, Remote printer KP#1 through KP#9, Procedure

■Slip printer (continued)

■Report printer

Procedure

•INITIAL FEED# (Use the numeric entry) Initial line feed for a slip (0 to 64 lines)

•SLIP MAX LINE (Use the numeric entry)

Maximum number of lines printable on a slip (0 to 99)

•VP PRINT TIMES (Use the numeric entry) Number of times of validation printing (0 to 9)

Program each item as follows:

• TERMINAL# (Use the numeric entry)

Terminal number (1 through 254 : Enter “0” for local device.)

•CHANNEL# (Use the numeric entry) Channel number (1 through 7)

When you program as “0”, no RS-232 channel is assigned.

•PRINTER NAME (Use the selective entry)

Select the printer to be used.
SHARP ER-01PU	SHARP UP-T80BP
SHARP ER-03/04RP	EPSON TM-300
EPSON TM-T88/85	EPSON TM-U950

•AUTO CUTTER (Use the selective entry) Auto cutter function

YES: Enables auto cutter function.

NO: Disables auto cutter function.

NOTE When “ER-03RP” is connected, select “NO.”

•PAPER SHEET (Use the selective entry) Select a paper type.

TWO OR MORE:	Uses two or more sheets.
ONE SHEET:	Uses one sheet.

NOTE This option is available when the “TM-300” is selected.

■Remote printer (KP#1 through KP#9)

Procedure Program each item as follows:

• TERMINAL# (Use the numeric entry)

Terminal number (1 through 254 : Enter “0” for local device.)

•CHANNEL# (Use the numeric entry) Channel number (1 through 7)

When you program as “0”, no RS-232 channel is assigned.

•PRINTER NAME (Use the selective entry)

Select the printer to be used. SHARP ER-01PU SHARP ER-03/04RP EPSON TM-T88/85

SHARP UP-T80BP EPSON TM-300 EPSON TM-U950

207