Direct Key Programming

Use the following procedure to select direct-key programming:

Procedure

1. In the SETTING window, select “2 DIRECT KEY.”

The DIRECT KEY window will appear.

2.Select desired the keyboard to program from the keyboard list.

3. Select SETTING or COPY. If SETTING is selected, the

programming can be performed.

When COPY is selected, the key layout data can be copied from the keyboard list.

Select copied key layout from the list.

Leads to the programming for each key

156

Page 159
Image 159
Sharp UP-3300 instruction manual Direct Key Programming, 156, Leads to the programming for each key