10
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions
Using the oven controls.
Throughout this manual, features and appearance may vary from your model.
Oven Control, Clock and Timer Features and Settings

COOK TIME ON/OFF Pad

Press this pad and then press the HOUR
and MIN. pads to set the amount of time
you want your food to cook. Turn the
Oven Temperature knob to the desired
temperature. The oven will shut off when
the Cook Time has run out.

TIMER ON/OFF Pad

Press this pad to select the timer feature.

AUTOMATIC OVEN Light

This lights anytime the oven has been
programmed to automatically turn on
or off.

HOUR and MIN. Pads

These pads allow you to set times up to
11 hours and 59 minutes.
As a safety feature, this oven will automatically shut off
after 12 hours. On models with touch pad clock controls
this feature may be deactivated to allow the oven to be left
on for more than 12 hours. To deactivate or reactivate
the Automatic Oven Shut-Off, press and hold both the
MIN. +/– pads for about 4 seconds.

OVEN ON Light

Glows anytime the oven is heating. The
light will flash when the oven automatically
turns off to remind you to turn the Oven
Temperature knob to OFF.

Oven Temperature Knob

Turn this knob to the setting you want.
(On some models, you must push the knob
in before turning.) The temperature will
be displayed to indicate setting. Display will
change back to time after a few seconds.

PREHEATED Light

Glows when the oven reaches your selected
temperature.
On some models, opening the oven door will not
automatically turn the oven light on. You may use
the oven light switch to turn the light on and off.

CLEAN Light

Glows when the oven is in the self-clean
cycle. After the self-clean cycle, the light will
flash. Unlatch the door and turn the Oven
Temperature knob to OFF.
Do not lock the oven door with the latch during cooking.
The latch is used for self-cleaning only.

TEMP RECALL

Press the – pad above TEMP RECALL to
display the selected oven temperature.

Display

Shows the time of day and the time set
for the timer.
If “F—and a number or letter” flash in the display
and the oven control signals, this indicates a function
error code.
If your oven was set for a timed oven operation and a
power outage occurred, the clock and all programmed
functions must be reset.
The time of day will flash in the display when there has
been a power outage.

CLOCK Pad

Press this pad before setting the clock.

START TIME ON/OFF Pad

Press this pad and the HOUR and MIN.
pads to delay the starting of your oven
up to 11 hours and 59 minutes.