GE Installation Guide for Zoneline Remote Thermostat and 5100 Model Controls
Page 16

Installation Instructions

Remote Control/

Wall Thermostat

A

Metal cover over recessed connection space

The Zoneline can be controlled by using the controls on the unit or by a wall thermostat.

Detailed wiring instructions are packed with the low-voltage con- nectors in the recessed connection space on the Zoneline chassis.

To switch to a wall thermostat, move switch 10 to the ON (up) position (see illustration B at left). Connect the unit to a 6-wire Class 2

For some applications, it may be desirable to operate on low fan speed. Moving the auxiliary switch 11 to the ON (up) position will pro- vide low fan speed in both heating and cooling modes.

No external voltage may be applied to the unit through the Remote Thermostat terminals.

IMPORTANT:

B

Class 2

Remote

Thermostat

ON

OFF

Low fan speed

with Class 2

Remote

Thermostat

10 11

ON

OFF

Remote Thermostat (GE Model RAK147 or equivalent), as shown in illustration C at left.

After the wire connections are completed, replace the metal cover to prevent damage to the unit or personal injury.

Auxiliary Controls

C

 

6P Plug

 

Insert

1

RED

GRY

BLK YEL

WHT

BLU

 

 

 

 

 

Wire nut

 

 

 

 

 

6 PCS

+24V

FANMOT.

SOL.COIL

COMP.

HEATER

RAK147

GND

 

 

 

 

 

or equivalent

R G B Y W C T’Stat terminals Class 2 Thermostat

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Zoneline 800.626.2000 Before using your ZonelineWrite down the model and serial Read ALL Safety Information Before Using Replacing an existing unit?Mode Control Controls on your ZonelineVentilation Control Other Zoneline features About Your Heat PumpFan Switch Freeze SentinelCare & Cleaning Outdoor CoilsBase Pan Room Cabinet and CaseAir Filters Read carefully Use the correct wall caseUse the correct outdoor grille Replacing a ducted chassis Replacing 230/208 volt unitsImportant Notes Important electrical safety-read carefullyZoneline Components 230/208 Volt Electrical Supply How to ConnectVolt Electrical Supply Install the Wall Case and Exterior Grille Power Connection Chart Insulated Wall Case Install the Unit into the Wall Case Replace the Room CabinetBoost Heat Option Low Voltage Connectors & Auxiliary ControlsElectric Heat Option Remote Control Wall Thermostat PCSDo not use a common buss in the CDC wiring Central Desk ControlDiagnosis Switch Temperature LimitingNoise Things that are normalExplanation Before you call for service Zoneline Does Not Cool or Heat as it ShouldZoneline Doesn’t Start What to DoCall SVC Indicator Light Burning Odor at Start of Heating OperationHeating Operation Air is Not Always Cool or Hot During OperationPage Further Service On-Site Repair ServiceParts and Accessories We’ll be thereWhat is Covered What is Not Covered
Top Page Image Contents