Samsung AM26B1C13, UM18B1C2, UM26B1C2, UM27B1C3, AM27B1C13, AM27B1C07 Cooling Your Room

Page 11

Cooling Your Room

ENGLISH

You must select the Cool mode if you wish to adjust the:

◆Cooling temperature

◆Fan speed when cooling

1 If necessary, press the (On/Off) button.

Result:

◆ The 5 Way indicator on the indoor unit lights up.

 

◆ The air conditioner starts up in the mode selected

 

when the unit was last used.

 

◆ The indoor unit beeps.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

◆Plugged in

◆Stopped

lt will start up normally after three minutes.

2 If the is not displayed at the top of the remote control,

press the MODE button on the remote control one or more times until it appears.

Result: ◆

The indoor unit beeps each time you press the MODE button.

◆

The air conditioner runs in COOL mode.

Note You can change modes at any time.

3To adjust the temperature, press the TEMPERATURE buttons one or more times until the required temperature is displayed.

Possible temperatures are between 65°F(18°C) and 86°F(30°C) inclusive.

Result: ◆ Each time you press the TEMPERATURE buttons:

-The temperature is adjusted by 1°F(1°C)

-The indoor unit beeps

◆The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature; the fan will, however, operate.

4Select the fan speed by pressing the FAN button one or more times until the required setting is displayed:

Automatic (rotated : )

Low

Medium

High

Result: Each time you press the FAN button, the indoor unit beeps.

5To control the direction of the air flow, refer to page 15.

E-11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Installation Manual Manual DE Instrucciones Safety Precautions Contents Indoor Unit View of the UnitOutdoor Unit UM18B1C2 Remote Control Buttons and Display Getting Started Installing the Remote Controller Holder Inserting the Remote Control BatteriesTo obtain an Using with the indoor unitSelecting with the Remote Control Way FunctionSelecting the Automatic Operating Mode Cooling Your Room Changing the Room Temperature Quickly Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction Horizontally Adjusting the Air Flow Direction VerticallyTo Cancel the On Timer Setting the On TimerTo Cancel the Off Timer Setting the Off TimerTo Cancel the Sleep Timer Setting the Sleep TimerTopicRecommendation Operating RecommendationsIf the air conditioner is used at... Then Temperature and Humidity RangesMode Outdoor Temperature Indoor Temperature Indoor Humidity Have switched off the breaker used for the unit Cleaning Your Air ConditionerAUTO, Cool Solving Common ProblemsInstalling a Filter Option Model Technical SpecificationsUnit operation Installation Manual Purging the Unit Indoor Unit Deciding on Where to Install the Air ConditionerPiping length and the height Unit26,000Btu/h 27,000Btu/h Accessories in the Outdoor Unit Case Air Conditioner and AccessoriesAccessories in the Indoor Unit Case Wall Window frame Fixing the Installation PlateThen follow Steps Purging the Unit Connecting the Assembly Cable Outdoor Unit To install the drain hose, proceed as follows Installing and Connecting the Indoor Unit Drain HoseTorque Installing and Connecting the Indoor Unit Assembly PipingPipe Depth a Cutting/Extending the PipingUM27B1C3 Connecting the Cables to the Outdoor UnitUM18B1C2 UM26B1C218/26 Electrical Work Auxiliary Circuit BreakerChecking Correct Earthing Fixing the Unit in Position Use Vacuum Pump as shown at the figure Connecting Up and Purging the CircuitPerforming Leak Tests To check for gas leaks on Then, using a leak detector CheckPlacing the Indoor Unit in Position Checking and Testing Operations Explaining Operations to the Owner Electronics

AM26B1C13, AM27B1C07, AM27B1C13, UM27B1C3, UM26B1C2 specifications

The Samsung AM27B1C07, UM26B1C2, AM26B1C13, AM27B1C13, and UM18B1C2 are a series of advanced memory devices that underline Samsung's commitment to providing high-performance solutions in the evolving landscape of electronics and computing. These products are characterized by their cutting-edge technologies, reliability, and efficiency, catering to various applications in consumer electronics and industrial use.

One of the main features of these series is their use of Samsung’s state-of-the-art NAND flash technology. This technology is designed to enhance data storage performance while minimizing power consumption, making these devices ideal for portable and battery-operated applications. The devices utilize 3D NAND architecture to increase storage density while ensuring superior durability and speed.

The AM27B1C07 and AM27B1C13 are particularly noted for their high sequential read and write speeds, making them suitable for tasks that require rapid data access, such as gaming and high-definition video processing. These memory solutions support advanced error correction codes (ECC) which ensure data integrity and reliability over time. They have also been optimized for lower latency, enhancing overall system responsiveness.

The UM26B1C2 and UM18B1C2 variants focus on delivering optimized bandwidth, catering well to the demands of modern applications including mobile devices, tablets, and laptops. With integrated power management features, these memory devices help extend battery life while maintaining high-performance levels during peak usage.

All models in this series are built to withstand demanding environments, boasting an extended temperature range that assures stable operation. This feature makes them highly suitable for industrial applications where conditions can fluctuate significantly.

Additionally, Samsung’s commitment to sustainability is evident in these memory solutions. They are designed with energy-efficient processes that not only enhance performance but also reduce the carbon footprint of their production.

Overall, the Samsung AM27B1C07, UM26B1C2, AM26B1C13, AM27B1C13, and UM18B1C2 integrate advanced technologies and features that address the needs of various markets, including consumer electronics, automotive, and industrial sectors. Their blend of high speed, efficiency, and reliability makes them an attractive choice for manufacturers looking to enhance their product offerings with cutting-edge memory solutions.
Top Page Image Contents