Samsung AM27B1C07, UM18B1C2, UM26B1C2, UM27B1C3, AM27B1C13 Solving Common Problems, AUTO, Cool

Page 22

Solving Common Problems

Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call.

Problem

Explanation/Solution

 

 

The air conditioner does not operate at all

◆Check that the breaker used for the air conditioner is switched on.

◆Check that the 5 Way indicator on the indoor unit is on;

if necessary press the (On/Off) button on the remote control.

◆Check whether the TIMER indicator on the indoor unit is switched on. If so:

-Wait until the switch-on time is reached and the air conditioner starts up automatically

-Cancel the timer (see pages 16 and 17 for further details)

The air conditioner does not operate with the remote control

◆Check that there are no obstacles between you and the indoor unit.

◆Check the remote control batteries.

◆Check that you are close enough to the indoor unit (seven metres/yards/23ft. or less).

No beep is heard when you press the (On/Off) on the remote control

◆Check that you are pointing the remote control at the remote control sensor in the right of the indoor unit.

◆Replace the remote control batteries if necessary.

The air conditioner does not cool

◆ Check that the correct operating mode has been selected

 

(AUTO, COOL).

 

◆ The room temperature may be too low or too high.

 

◆ Dust may be blocking the air filter guard; refer to page 21 for cleaning

 

instructions.

 

 

◆ Check that there is no obstacle in front of the outdoor unit.

 

 

The fan speed does not change

◆ Check that the operating mode is set to COOL or FAN ;

when you press the FAN button

in the AUTO mode, the fan speed changes automatically and in the

 

DRY mode, it is set to AUTO.

 

 

The air flow direction does not

◆ Check that the air conditioner has been switched on; if necessary,

change when you press the

press the

(On/Off) button on the remote control.

SWING button

 

 

 

 

The timer is not correctly triggered

◆ Check that the timer has been programmed correctly; see pages 16

 

and 17.

 

 

 

 

Odours are permeated in the room

◆ Air the room.

 

during air conditioning

 

 

 

 

 

E-22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Installation Manual Manual DE Instrucciones Safety Precautions Contents View of the Unit Indoor UnitOutdoor Unit UM18B1C2 Remote Control Buttons and Display Getting Started Inserting the Remote Control Batteries Installing the Remote Controller HolderWay Function Using with the indoor unitSelecting with the Remote Control To obtain anSelecting the Automatic Operating Mode Cooling Your Room Changing the Room Temperature Quickly Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction Vertically Adjusting the Air Flow Direction HorizontallySetting the On Timer To Cancel the On TimerSetting the Off Timer To Cancel the Off TimerSetting the Sleep Timer To Cancel the Sleep TimerOperating Recommendations TopicRecommendationMode Outdoor Temperature Indoor Temperature Indoor Humidity Temperature and Humidity RangesIf the air conditioner is used at... Then Cleaning Your Air Conditioner Have switched off the breaker used for the unitSolving Common Problems AUTO, CoolInstalling a Filter Option Technical Specifications ModelUnit operation Installation Manual Purging the Unit Deciding on Where to Install the Air Conditioner Indoor UnitUnit Piping length and the height26,000Btu/h 27,000Btu/h Accessories in the Indoor Unit Case Air Conditioner and AccessoriesAccessories in the Outdoor Unit Case Then follow Steps Fixing the Installation PlateWall Window frame Purging the Unit Connecting the Assembly Cable Outdoor Unit Installing and Connecting the Indoor Unit Drain Hose To install the drain hose, proceed as followsPipe Installing and Connecting the Indoor Unit Assembly PipingTorque Cutting/Extending the Piping Depth aUM26B1C2 Connecting the Cables to the Outdoor UnitUM18B1C2 UM27B1C318/26 Auxiliary Circuit Breaker Electrical WorkChecking Correct Earthing Fixing the Unit in Position Connecting Up and Purging the Circuit Use Vacuum Pump as shown at the figureTo check for gas leaks on Then, using a leak detector Check Performing Leak TestsPlacing the Indoor Unit in Position Checking and Testing Operations Explaining Operations to the Owner Electronics

AM26B1C13, AM27B1C07, AM27B1C13, UM27B1C3, UM26B1C2 specifications

The Samsung AM27B1C07, UM26B1C2, AM26B1C13, AM27B1C13, and UM18B1C2 are a series of advanced memory devices that underline Samsung's commitment to providing high-performance solutions in the evolving landscape of electronics and computing. These products are characterized by their cutting-edge technologies, reliability, and efficiency, catering to various applications in consumer electronics and industrial use.

One of the main features of these series is their use of Samsung’s state-of-the-art NAND flash technology. This technology is designed to enhance data storage performance while minimizing power consumption, making these devices ideal for portable and battery-operated applications. The devices utilize 3D NAND architecture to increase storage density while ensuring superior durability and speed.

The AM27B1C07 and AM27B1C13 are particularly noted for their high sequential read and write speeds, making them suitable for tasks that require rapid data access, such as gaming and high-definition video processing. These memory solutions support advanced error correction codes (ECC) which ensure data integrity and reliability over time. They have also been optimized for lower latency, enhancing overall system responsiveness.

The UM26B1C2 and UM18B1C2 variants focus on delivering optimized bandwidth, catering well to the demands of modern applications including mobile devices, tablets, and laptops. With integrated power management features, these memory devices help extend battery life while maintaining high-performance levels during peak usage.

All models in this series are built to withstand demanding environments, boasting an extended temperature range that assures stable operation. This feature makes them highly suitable for industrial applications where conditions can fluctuate significantly.

Additionally, Samsung’s commitment to sustainability is evident in these memory solutions. They are designed with energy-efficient processes that not only enhance performance but also reduce the carbon footprint of their production.

Overall, the Samsung AM27B1C07, UM26B1C2, AM26B1C13, AM27B1C13, and UM18B1C2 integrate advanced technologies and features that address the needs of various markets, including consumer electronics, automotive, and industrial sectors. Their blend of high speed, efficiency, and reliability makes them an attractive choice for manufacturers looking to enhance their product offerings with cutting-edge memory solutions.
Top Page Image Contents